What is the best tool for pulling wood down from a woodpile?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
XTROOPER

XTROOPER

ArboristSite Lurker
Joined
Aug 5, 2011
Messages
31
Location
Beach Lake, PA
I have been pulling firewood in from my wood pile and throwing it into the basement via a small window. The wood piles up and I was wondering what would be the best tool to pull the pile down when it piles up high enough to reach the window. My mother in law uses a potato rake or what I think is known as a clam rake. it has larger tines and several smaller tines up front. I try to use a regular garden rake, but I am sure folks on this forum will have a better suggestion. Thank you very much in advance.

XTROOPER
 
Nosmo

Nosmo

Addicted to ArboristSite
Joined
Mar 28, 2009
Messages
1,073
Location
Muskogee, Oklahoma
Pulling Rounds

Here are the ones I use for pulling the rounds - say for instance out of the back of my pickup's bed. You can use anything which is strong enough and will hold into wood.

These are homemade from long rods which were heated and sharpened to a 4-corner point and heat treated to be hardened. They are installed into hoe handles and work great. I originally made these a few years ago for gaffs when I used to fish a lot.

Nosmo
 
SPDRMNKY

SPDRMNKY

ArboristSite Dork
Joined
Nov 23, 2010
Messages
670
Location
Kansas
whatever extra hookie-doo you have sitting around...preferably light, long, and narrow

I'm diggin' the garden hoe idea...seems pretty versatile in this app

-----

why not just stop when you reach the window...go inside and stack it...then continue?
 
cheeves
Joined
Aug 8, 2010
Messages
14,732
Location
Plymouth, Mass. America's Hometown
I have been pulling firewood in from my wood pile and throwing it into the basement via a small window. The wood piles up and I was wondering what would be the best tool to pull the pile down when it piles up high enough to reach the window. My mother in law uses a potato rake or what I think is known as a clam rake. it has larger tines and several smaller tines up front. I try to use a regular garden rake, but I am sure folks on this forum will have a better suggestion. Thank you very much in advance.

XTROOPER
That's exactly what I used to use, a 3 pronged clamming rake. Until it was ripped off out of the back of my truck.
 
cantoo

cantoo

Addicted to ArboristSite
. AS Supporting Member.
Joined
Jan 14, 2002
Messages
4,799
Location
North of Goderich, Ontario, Canada
Tough to see in the pics but I use a plastic pipe to slide my firewood into my basement. The wood used to pile up right under the window, now I can put 3 times as much wood down until it's to the window. View attachment 220370
220370d1327804383-firewood-slide-jpg
 
turnkey4099
Joined
Feb 27, 2002
Messages
20,060
Location
se washington
Got a 36" version of that a few months back. (Self, you should've done that years back. Many years back.)

Same here. I held off and held off for 20 odd years because they seemed to be highly overpriced. Bought one about 5 years ago and the first time I used it started bending over so my wife could kick me.

Then I built a 7' one from a closet pole and a 'dressler' coupling from the plumbing shop. No more climbing up in the truck to move stuff back for unloading.

I feel naked if it isn't with me when I'm working around wood either in the field or at home.

I too used rakes, hoes, etc. I can gaurantee that anyone who uses a hookeroon once and makes a homemade one with a longer reach will never again reach for a hoe or rake

Harry K
 
bcorradi

bcorradi

Arboristsite.com Sponsor
Joined
Jan 18, 2004
Messages
4,328
Location
Lake Park, MN
I have a tuck under garage so I just back up my truck and unload the wood. If I had to build a house i wouldn't build one with a tuck under garage, but it doesn't work too bad if you have a freestander in the basement.

If I built a new house I would have an OWB outside...its a lot better than an indoor stove imo.
 
andydodgegeek

andydodgegeek

The stool maker
Joined
Jul 24, 2011
Messages
3,704
Location
north of hwy 8 ,MN
Go to this site. pickaroon.com
I bought the 48" handled one and it is a very nice unit works much better than the ones with cast iron heads, Also they are priced very good. I also like the fact that they are made right in my home state of Minnesota. They are sold off of the site by a guy who runs a small propane company up in Cook, MN and he was a pleasure to deal with. Trust me and buy one you wont regret it.
 

Latest posts

Top