Majorpayne
ArboristSite Operative
Used oil from my truck at 10 to 1 with E85.
Are there any particular spark plugs that are preferred for the 32:1 or the 40:1 mixes?
spark plugs are same ,just retune the carb if too lean with the richer mixture
and what mdavlee said on the 50 to 1 ,they have to meet a certain emissions ,32 or 40 to 1 will give your crank bearings extra lube ,plus better ring seal ,i have torn down engines 50 to 1 and they were fairly dry inside and the 32 to 1 has nice coat of oil inside ,on a modded saw spinning up a little higher than stock i like the extra oil mix in the gas,its pretty simple to get 32 to 1 ,4 oz per gallon ,or 20 oz per 5 gal
Switched from Redline racing @ 50:1 to Bel-Ray H1R @ 32:1 based on the heavy hardened carbon
deposits Randy found monkeying around with my saws recently....Lesson learned.
Also add a little Marine Sta-bil to my Premium (92) e-10 pump gas.
How much is a Quart of "Gary's-Goo" running these days?
Currently using Belray MC-1 40:1 with BP 91 octane E free.
How does that Belray smell compared to Maxima K2?
Interesting. I've never had carbon deposit issues with Redline, even with mixtures as thick as 25/1.
http://www.redlineoil.com/content/files/tech/Two-Stroke Technical Info.pdf
Enter your email address to join: