- Joined
- Dec 6, 2014
- Messages
- 21,238
- Reaction score
- 25,145
Kind of like more than 2 genders???
Another full chisel is circled in blue, so someone may have spliced in the semis in the middle.
View attachment 762416
One hell of an illusion for the top plate to form a sharp right angle on one tooth in the photo and not the one in front of it?No I think it's an illusion. No chisel in this chain. I always buy chisel but this came on the saw.
Sent from my SM-G920P using Tapatalk
Finger your what?????Seriously, sharpen the chain and show us your starting point. Sharp chains stand out, whereas dull chains are difficult to tell from a picture. When I look at someones working chain, I see if it will prick my finger tip. Looking don't tell a whole lot.
Not the same chain?Ok... I was second guessing after looking at the picture. I made two laps around that chain and ALL links are the same. There are only semi chisel (Stihl) and no RS chisel teeth in this loop. I'm sure of it.
Sent from my SM-G920P using Tapatalk
I definitely understand what full chisel is. Have used it since the beginning. Not sure why the picture looks it but it's an illusion. I spun the loop twice after seeing this discussion, and all side tooth profiles are round (no sharp square edge).If you do not understand what Harley an Philbert are saying, just trash it and start with a new chain. Unless you are gunny.
Ok, clean the gulley and file a C into those teeth.
My bet is, those are dremmeled.Odd looking depth gauges. Never saw any with that profile.
Buy this.
STIHL 5605 007 1029 Complete Saw Chain Filing Kit For 3/8-Inch, 13/64-Inch https://www.amazon.com/dp/B002YT2UUS/ref=cm_sw_r_cp_api_i_ap9JDbS2PE0TB
File to the angles on the guide & use the supplied gauge to get all your depth gauges, ( the shark fins), correct.
Husky has something similar but I’ve never used theirs.
Consistency is the goal.
Sent from my iPhone using Tapatalk Pro
Enter your email address to join: