M Mr. Obvious ArboristSite Operative Joined May 27, 2007 Messages 183 Reaction score 49 Location Turn Left at the Stoplight Sep 15, 2008 #1 Does anyone know the WOT rpm for the 2094 or 2095 saws? Using search it seems the 394 husky is 12,500 so I assume the same would work but wanted to make sure. Thanks
Does anyone know the WOT rpm for the 2094 or 2095 saws? Using search it seems the 394 husky is 12,500 so I assume the same would work but wanted to make sure. Thanks
A albert Addicted to ArboristSite Joined Feb 7, 2008 Messages 1,572 Reaction score 416 Location s.e pa. Sep 15, 2008 #2 WOT for jonsered 2094 my info shows 13,000 for a 2094
M Mr. Obvious ArboristSite Operative Joined May 27, 2007 Messages 183 Reaction score 49 Location Turn Left at the Stoplight Sep 15, 2008 #3 Thanks, Is that from a service manual? My operators manual just gives the old 4 cycling by ear method.
Thanks, Is that from a service manual? My operators manual just gives the old 4 cycling by ear method.
A albert Addicted to ArboristSite Joined Feb 7, 2008 Messages 1,572 Reaction score 416 Location s.e pa. Sep 16, 2008 #4 WOT for jonsered 2094 I got it from a intec manual, I have a husq 394 and was comparing it to the 2094 394 max is 12,500 2094 is 13,000
WOT for jonsered 2094 I got it from a intec manual, I have a husq 394 and was comparing it to the 2094 394 max is 12,500 2094 is 13,000
SawTroll Information Collector Joined Jan 13, 2005 Messages 64,856 Reaction score 81,583 Location Troms, North Norway Sep 16, 2008 #5 13000rpm max for the 2095 as well, according to the 1996 workshop manual. Remember that the 2094/2095 isn't a Jred version of the 394xp, only the bore and stroke + maybe the bar nuts is the same...... Last edited: Sep 17, 2008
13000rpm max for the 2095 as well, according to the 1996 workshop manual. Remember that the 2094/2095 isn't a Jred version of the 394xp, only the bore and stroke + maybe the bar nuts is the same......