Search results

Old ChipMonk, I too have a Holan, were you able to get any more info on these units? (yes I know its an old thread but Im pretty desperate for info)

FIXED Should anyone stumble upon this in the future, my issue was with the joystick throttle linkage. When the throttle is depressed these three auxiliary functions are locked out but the rest of the joystick functions. The return spring was broken off and the linkage wasnt lubricated so the...

Hi All, I purchased a '99 Freightliner truck with a 55' Holan bucket. The truck has been well serviced and cared for by a large electrical contractor, it has a joystick and three extras hydraulically actuated jib, winch and bucket tilt. I'm running into an issue with the controls for the three...

Hey Mike, I got the knives sharpened (took about two weeks for them to finally get to them after I dropped them off). I set them in and did about a .030 thickness, maybe even a little less. And we are back in business - same as you said, anything longer than about 8' and 6" thick will bog it...

Pulled the blades and dropped them off for a sharpening...

nk14zp, thanks for the link, that was actually the thread I found before that led me to leave it as a .028 gap even though the manual calls for .030-.035 can you elaborate on how to sharpen them on the drill press? where would you recommend getting a new set?

knives are sharp, not enough to shave hairs but no burrs or chips, comes to a fine edge.

Unfortunately, yes. they have a 40 degree face. But good question. They havent been resharpened since they were bought new and seen little use. I'm seeing like $140 to buy new ones from Baileys which is about what it would cost to sharpen these locally. I might just buy new ones and rule that...

bump for help?

added some photos to better illustrate the chips im getting. Any help?

Hi All, I've been going through the forums while rebuilding a recently purchased 12" drum Asplundh whisper chipper. I picked it up last year and it worked well, but often would have to throw the same branch in a few times to get it to disappear. I used it around the farm quite a bit but at one...

Hi All, Long time fan, first time poster, looking for some help from all you gurus on my new-to-me chipper. I bought it from the original owner and its in good shape considering its age. The SN is JEY 19932, powered by a Ford 300. I bought it to clear some land on our farm, anything smaller...