Search results

It absolutely works great! I suppose it could be a bit more dangerous, given that the trailer weighs more than double what my 5*8 does when full, but then, it's also worth at least 2 trips, so there's that. We didn't his last year as well, and it works great. Also works great when there isn't a...

Compression is about normal on it. It's just down 3cc and is 4.9hp stock vs a 372xpxt is 5.5hp stock. A 562xp is 4.7hp. Mike Sent from my Moto Z (2) using Tapatalk

I've got a 570 that I leave down at the farm, but it's certainly a bit down on power compared to a 372. It'll run a 24 in hardwood, but not with any authority. Sent from my Moto Z (2) using Tapatalk

Got a load of wood from the farm, on Sunday, with the new 572xp. This is like THE way to do wood, IMO! Load it with the forks on the tractor, drag it home, cut it up on the trailer, then roll it off the trailer right onto the splitter. No bending over the splitter on the ground, no lifting wood...

Yep, when Husq warrantied my 550XP and sent me another one, I was able to "buy it back" from them and with the check I sent them, I had to put the S/N tag in the envelope. Mike

Nice! Sent from my Moto Z (2) using Tapatalk

Got this 572XP from Bob yesterday and put my B&C on it. The wife was outside this morning and asked me to make some sawdust for the worn/muddy places in the yard... Don't have to tell me twice! Man, only 2/3 through the first tank and it's already easily as good as my 180psi "farmer Jones"...

Got my 572 today. Only made like 6-7 cuts on a 20" hard maple but I really like it! Mike Sent from my Moto Z (2) using Tapatalk

Nah, the saw is mounted to the grille guard, lot the loader. Mike Sent from my Moto Z (2) using Tapatalk

Realized in forgot to update this last fall. Works great! So nice to finally have the chainsaw on the front while bush hogging trails! Sent from my Moto Z (2) using Tapatalk

Good to hear! I'm planning on picking one up in the next couple weeks. Sent from my Moto Z (2) using Tapatalk

Yeah, that's where he originally set it when he ported it. It just went up a bit when I did the carb kit, so had to be brought back down Mike Sent from my Moto Z (2) using Tapatalk

Fwiw, I tried both and the max rpm was 400rpm higher with the black one vs the fiber looking one. 14,4k vs 13,9-14k. Joe said to tune it back to 13,5 and roll with it, so I put the fiber one back in, richened it up a hair to 13,5 and it's happy. Thanks, Mike Sent from my Moto Z (2) using Tapatalk

Ok, so since this is a ported saw, o should probably run the Teflon one, because it flows better, and that's what came out of it. Thanks Mike Sent from my Moto Z (2) using Tapatalk

Oh, I guess it is like a rubber coated fiber. Yeah, I only run either canned fuel or 91 E0 mix with synthetic oil from my local co-op. Thanks, Mike Sent from my Moto Z (2) using Tapatalk

So I'm putting a carb kit in this 371xp, and what came out of it was the gasket and the fiber diaphragm. The kit came with the black one too. What's the black one for? Thanks Mike Sent from my Moto Z (2) using Tapatalk

Yeah, there's not really a place, though, other than exactly in the way when you're looking back at whatever stump grinder, bush hog, whatever is back there, or catching your tricep on a felling spike. The fenders are plastic, so that's out, or would otherwise be ideal. The fuel tank is right up...

I'm making a UHMW mounting sleeve on the tractor for chainsaws, and the biggest thing I've got here is a few 372XPs. I'll eventually get a Stihl 660 or build a Hutzl one, and probably a 572xp, and want to make sure it'll also clear the loader. Anybody got the lengths from case front to...

Popped up iny subd videos this morning and I watched it at lunch. Great vid, thanks!! Mike Sent from my Moto Z (2) using Tapatalk

I run a NK bar and standard chain, as well, on my Husqvarna 440. No issues. Mike Sent from my Moto Z (2) using Tapatalk