Search results

440/660 I use to think the same thing ang I found out a while ago that the 066/660 is made for big wood and can pull a 36" bar no problem. The 044/440/441 what ever your running. Personal I like a 20" bar or 24" bar on them I run 2-440 mag with 20" and 2-044 with 24" bars and love the way they...

I don't know about other people on this site but I'm sure those that grind would tell you that if you would have ground that stump down 12-16 inches , I charge extra for, remove all the grindings then bring in top soil and pack it down your done. I do it all the time and have not had any one...

Old bar I have 2 old remingtons that have those style bars. I don't know if they were original bars but there the only saws I have seen with that style bar. And I though that the av modle was newer than the farm boss my 041 av is Electronic version no points. And Bowtie if you looking for a...

009 I was very unhappy with the 009 I bought took it back and traded it in for the ms200. Great little saw the 200 with the rear handle. I run all 14inch on all my small saws 63pm50. I have 2-ms200t, 2-020t, 1-192t,1-019t, and the new ms200. and they all cut great.:hmm3grin2orange:

If you were closer I would come in and in one day grind all of the stumps for a price of 10 to 15 dollars a pc. and all you have to do is wacth and tell me how deep you want me to go.:blob3:

3120Xp Great video Four Paws. Dustytools just want to buy a newer big saw to replace or take the place of some of my older homelites. Thinking of putting my wizzes on the shelf and my 650ss and c-72 I might sell?

Iron fence post Old Cherry Tree grew around the post it was about 4ft. long I hit it three times before I went high enough to miss it.:bang:

I'm tring to get some ideas for an 3120xp yr is 2000-2003? It's sitting at the small engine shop in town and I'm thinking of buying it. What could I do or should I do if I buy it. And what is a fair price for this saw with no bar and I heard it run sounds good. Thank you for any help you can...

041av I have a 041av and had this same problem. I sent the saw to the stihl dealer and had some work done it ran when I dropped it off. They couldn't get it running after they did the work. They didn't charge me because they couldn't get it to turn over. Took it home and pulled the plug and...

Just wanted to know the biggest bar you can run or would run on this saw? I have a 066 and run a 36" bar 3/8 .050 rs chain. And it cuts great but it seems that the homelite with the same bar and 404 chain cuts faster and a lot more power? The 066 has maybe 40 or 50 hrs. on it. Anyway I wanted...

pole saw I have 3 stihl pole saws extended I think there close to 12ft. plus you holding it gives you 6 or7 more.And they are gas powered $469 or $529 I don't remember it's been 2or3 -yrs. works great will cut the full 12" of the bar and then some I have cut some big lower limbs going from...

Wizz 66 thats what I was going to do but my scale is old ad being off 3-5 pounds ? I'll go get a new scale and get back to you. POLLOCK

Complete oiling chains Old metal baking sheet from yard sale $1.00 it's 16"x24" with 2" sides put 2qts. of oil in it and let them soak. Then hang them right back over it and let them drip put in back in a new box. Works Great. And it goes right under the bench when I'm done. But I Like those...

Wizz 66 Anyone know how much a wiizz 66 with 48" bar and chain weighs|? I don't have a scale that would weighit that close it would be off 3-5 pounds. Thanks if anyone could answer. POLLOCK

Stiff Don't look stiff to me. Looks good from here nice Job. Keep Climbing It keeps you young. Tony

I have One Give me a PM and I'll check the piston and cylinder If it's good pay the shipping and it's yours I'll check the shop in the morning. You can have the whole saw I don't remember what we took off. but it did run when we putit on the shelf. Tony

3120 Did you buy it on line or local. just wanted to know thinking of switching to huskys Pollock

Helicoil I have had two heliciols in a wisconsin engine for about 10 or 12 years don't remember excactly when I put them in but they still work fine. And even if you have it come out just put another one in. It sounds like you got a good deal good luck,have fun and safe cutting Tony

Stihl saws and dealer service Have always used Stihl but after buying a 041 AV on e-bay from a Stihl dealer? Swore that the saw was just all redone! And the price though I was getting a real deal I was wrong. He was 1/2 right new cylinder and piston and rings but who ever rebuilt the carb had...

E-bay I think there should be a thread on this site of sellers on e-bay to stay away from if they're going to try to scam people. Because I know this isn't the first time someone has had probles with e-bay. I had a problem with a saw I bought from e-bay man said he was a Stihl dealer and the...