chipper

Altec DC610 stolen last Saturday in the Texas panhandle. To help identify, the 2 center flaps on the feed chute have been cut off and it has a leak on the hydraulic tank and you an see the new clutch under the shielding for the belt. If seen please call me at 806 884-5909

have a bandit 90xp with the v465d was running run then shut down it will start then shut down after the key is released , but will run if the key is left in the start position , was going to try a new switch any thoughts or help ? thanks for any info

Hey all, been creeping for a while and finally have a question I can't get answered on here by browsing the forums so I figured I'd write up a post for it. I'm borrowing a Model 17 for the month to use and am wondering what the weight of the chipper is. Can't find it listed on the chipper...

hi, setting up a small residential tree work business, I am an experienced and qualified arborist going out on my own for the first time, I’ve got a few saws, all the climbing and rigging gear just working out what set up I want for dealing with green waste I’m currently just hauling away with...

Altec 60' Boom bucket truck 6 speed manual trans Forestry chip box dump body 2 outriggers Many updated parts - ready to work Former Asphlund Truck Hydraulic Brakes Bucket plumbed for hydraulic saws 8.1L gas engine Kubota diesel pony motor Pintle hitch Passed inspection 3 weeks ago 7k worth of...

picked up a bandit 65 serial # 004976 , going replacing the motor and all the original wiring to tach is cut up and spliced everywhere , looking for a wiring diagram for chipper , also looks like some wires have been cut from some type of hydro solenoid towards the back of machine , thanks for...

looking at bandit 65 ew with a Wisconsin motor , saw some newer 65 xp which looked slightly bigger at the infeed tray and had a slightly different feed wheel , how do they compare in performance . thanks for any info

need to change the motor , anyone knows what will bolt in place of a Honda 20hp with some extra power thanks

looking at bandit 65 not sure of year but have serial number , the feed tray looks smaller compared to newer bandit 65's the feed springs are different more like a 45 degrees then the new straight vertical springs like the newer ones , the newer bandit 65 with wider tires look much bigger...

Does anyone here have any experience with the Wallenstein Cr model of towable chippers? They have what appear to be pretty decent machines in 7 and 10" capacity. If anyone has any time logged operating on, I would love to hear about the pros/cons.

I have a 1986 mitts and merril chipper with ford st 6, the clutch assembly in mine is an automatic pto. It started leaking tranny fluid so after multiple repairs im still in same boat- aka-without my chipper-losing productivity and $$$ just a headache. Here's what Ive had done so far....had pto...

Looking for any information on a 20/70 morbark chipper gas 35hp Especially weight since towing on a smaller truck Any issues Thank you for any information

Been havin issue with chipper push tools eg tyne rakes going tho chippers & metal parts or aluminum handles not good for knives so was looking for solid big tyne rakes in polyplastic that takes on wooden handle & i think we found best option ezee-rake-head made in USA so should be easy to...

Hi there. I have a 2005 bandit 90xp and I feel like it just doesn't pull like it should. I have done a lot of research and asked a lot of guys and they all suggest sharpening my feed wheels. Anyone have and words of advice or know I how I go about doing this

I have a 2005 Bandit Model 280 for sale in Colorado. This chipper does have 4400 hrs but is a tier 3 CAT 135 HP motor and starts and runs great. The hrs are appx. as I still use it somewhat frequently. But we have a grapple truck on the way and do not need 2 large chippers. Keep the air filters...

I am going to look at a late 80's 1230 Vermeer chipper but I'm unsure on what it is worth because I cannot find a similar one for sale anywhere so if anybody has any idea if 4000 is too much to pay for a machine that has 1700 on it? It seems to be in really good shape and I believe it has the...

hi im hoping that i can get some good advise on what size and style chipper to get i started my tree service about 6 months ago and now its time to get a chipper i been looking at a 93 toro commercial auto feed type it has a 24hp but im not sure if thats going to be big enough. so dose anyone...

Hello, we use a Vermeer BC 1800 A in our tree business. We have been very happy with it as it chips an enormous amount of material very quickly. It is getter older, however and we have had ongoing problems with it's inability to blow the chips clear to the back of our truck bed. They barely...

what type of hydraulic fluid would my 625 gravely chipper take ? Also I am leaking hydro fluid from a relieve valve from chipper and is worse in reverse from the feed wheel. Thanks for any help

Cascade Tree Service is a locally owned, established and quickly growing tree service who focuses on tree trimming, pruning and removals. We are looking to quickly fill a grounds person position ASAP. We would prefer an experienced applicant by will consider training a fast learner...