ArboristSite.com Sponsors
 
 


Black Cat Performance meets the 462c

Discussion in 'Chainsaw' started by Frank Rizzo, Jan 29, 2019.

Thread Status:
Not open for further replies.
  1. Frank Rizzo

    Frank Rizzo Custom Saw Modification 241c-441c,660 specialist

    Joined:
    Jul 13, 2018
    Messages:
    1,997
    Likes Received:
    580
    Location:
    Usa
    I’ve never seen the email you supposedly sent to Jack and his response to you as you stated in a previous post ... we have no problem with you posting it here or if you prefer pm me with it ... I’m not taking on any more work as my plate is full at the present time ... IF you wish to have Hotsaws101 perform the work then contact him at [email protected] .... Good luck in your future endeavors!
     
  2. F82418B6-E7B3-48B7-A250-ACA8435E9BE3.png 3A452314-8E05-4354-8D5E-C6E21FF13DFC.png 435496C0-7202-41BB-A6E7-C14D83A80E55.png
     
  3. Frank Rizzo

    Frank Rizzo Custom Saw Modification 241c-441c,660 specialist

    Joined:
    Jul 13, 2018
    Messages:
    1,997
    Likes Received:
    580
    Location:
    Usa
    Yah , the tree was actually leaning with a heavy crown in the direction of fall ... might not be able to see that from the video ... actually Ash is VERY prone to barber-chair Randy especially when EAB infested ! Most fart smellers , oops I mean smart fellers are aware of this fact ... I’ll be sure to consult you for your assessment before dropping anymore ... Heavens knows I only have about 40 more to do ! Lol -Perhaps you could also give some porting tips while you are at it ! Here’s one that went down right on target and the Hotsaws101 461R bucking the aftermath right quick ! ... that’s how we do it up north Randy O !
     
  4. How come he isnt responding after the batphone hot line call?
     
  5. Nice close up of the boots in that first vid
     
    CHOP...CHOP... likes this.
  6. Mastermind Worksaws

    Mastermind Worksaws The Enabler

    Joined:
    Jan 14, 2018
    Messages:
    428
    Likes Received:
    2,174
    Location:
    Jamestown Tennessee
    Hell it wasn't more than 12" in diameter. Heavy crown?

    You probably should stop while you're still alive.
     
    mdavlee, CHOP...CHOP... and Tor R like this.
  7. Frank Rizzo

    Frank Rizzo Custom Saw Modification 241c-441c,660 specialist

    Joined:
    Jul 13, 2018
    Messages:
    1,997
    Likes Received:
    580
    Location:
    Usa
    Yah , I can’t speak for another ; again good luck on your future endeavors!
     
  8. Frank Rizzo

    Frank Rizzo Custom Saw Modification 241c-441c,660 specialist

    Joined:
    Jul 13, 2018
    Messages:
    1,997
    Likes Received:
    580
    Location:
    Usa
    Actually it was over 18” at the stump ... 20” bar on that Hotsaws101 461R ripper .... here’s a smaller one about 16” at the stump for your enjoyment! as you can see Randy these trees grow straight up like a popsicle! When dead/dying from EAB a leaning crown makes them prone to chair ... We have since been using a rope in the canopy to assist the fall and it’s working well ! Here’s a throwbag launcher I made to get a line into the tree ... Works great , compressed air powered ! Use bike pump to pressurize cylinder ... get over 100ft with 80psi
     
  9. stihl sawing

    stihl sawing MAD DOG

    Joined:
    Feb 16, 2008
    Messages:
    42,363
    Likes Received:
    21,495
    Location:
    Across the bridge.
    Yah
     
  10. Why not? You said he was waiting for my email after you contacted him on the batphone hotline, can’t you put out another batphone hotline contact call and see what’s going on? Thankyou
     
  11. stihl sawing

    stihl sawing MAD DOG

    Joined:
    Feb 16, 2008
    Messages:
    42,363
    Likes Received:
    21,495
    Location:
    Across the bridge.
    yah, How about makin one of the 7 saplings you were supposed to cut.
     
    Tor R likes this.
  12. Frank Rizzo

    Frank Rizzo Custom Saw Modification 241c-441c,660 specialist

    Joined:
    Jul 13, 2018
    Messages:
    1,997
    Likes Received:
    580
    Location:
    Usa
    If you wish to contact Jack about him zipping a 362c for you then contact him at the email I provided ... That’s between YOU and Jack ... I’m unable to assist you at the present time , thank you for your consideration and have a blessed day ! Out
     
    Del_ likes this.
  13. Frank Rizzo

    Frank Rizzo Custom Saw Modification 241c-441c,660 specialist

    Joined:
    Jul 13, 2018
    Messages:
    1,997
    Likes Received:
    580
    Location:
    Usa
    Yah I have plenty of vids ... maybe I should start another thread ?
     
  14. But I did contact him at both emails you provided for me. I just posted them above. Can you please resend the bat signal for me? Thankyou
     
  15. Do you have the contact info for the hotsaws101 southern franchise you can give me? Thankyou
     
  16. stihl sawing

    stihl sawing MAD DOG

    Joined:
    Feb 16, 2008
    Messages:
    42,363
    Likes Received:
    21,495
    Location:
    Across the bridge.
    Yah...That would be me, you wish me to port yer saw?
     
    CHOP...CHOP..., huskihl and Tor R like this.
  17. Mastermind Worksaws

    Mastermind Worksaws The Enabler

    Joined:
    Jan 14, 2018
    Messages:
    428
    Likes Received:
    2,174
    Location:
    Jamestown Tennessee
  18. Pm sent. To be honest, I’m not good enough to tell the difference between my stock 362 and one modified by hotsaws101 east coast franchise/ psycho ss/ BCP. @Frank Rizzo since your so busy and I won’t be able to tell the difference between my stock saw and your zipped saw, would you be willing to just send me the sticker? I will pay full price as if you actually modified the saw. Thankyou
     
  19. stihl sawing

    stihl sawing MAD DOG

    Joined:
    Feb 16, 2008
    Messages:
    42,363
    Likes Received:
    21,495
    Location:
    Across the bridge.
    LOL
     
    huskihl likes this.
  20. p61 western

    p61 western ArboristSite Guru

    Joined:
    Jun 2, 2016
    Messages:
    923
    Likes Received:
    2,226
    Location:
    northern California
    Common side effect of this ****tard.
     
    CHOP...CHOP... and huskihl like this.
Thread Status:
Not open for further replies.

Share This Page