Echo cs620pw

[Scooter101]

I'm not having problems just curious, what should the Echo cs620pw idle at and what is the maximum rpm for this saw?

 

[SierraMtns]

https://www.echo-usa.com/getattachment/681a0682-fb22-4935-8928-f472f3ec558a/CS-620P_C69215_100317_es

Page 27

 

[SierraMtns]

Page 34 for WOT

 

[SierraMtns]

This one of the Echo saws I want to get. "W" one would be great out west.

 

[SmellyPirateHooker]

I just purchased a 620p. Ran 4 tanks of 40:1 fattened up under partial load. Then did the muffler mod and cleaned up the plastic air filter spacer. Finally I have a saw that stops me from making a few cuts before grabbing my non stock 288xp. I wasn't concerned with RPM because of the unlimited coil. Tuned in wood, but by ear I'd say it's spinning a tad under the 288. No surprise really with the bore and stroke, but very pleased all the same.

 

[BGE541]

I just purchased a 620p. Ran 4 tanks of 40:1 fattened up under partial load. Then did the muffler mod and cleaned up the plastic air filter spacer. Finally I have a saw that stops me from making a few cuts before grabbing my non stock 288xp. I wasn't concerned with RPM because of the unlimited coil. Tuned in wood, but by ear I'd say it's spinning a tad under the 288. No surprise really with the bore and stroke, but very pleased all the same.

Try a base gasket delete if you have the space... really wakes it up on the low end.