HUSKY 3120 XP W/ 48" .404 CHAIN COMPLETE GROUND UP REBUILD!!
Completley rebuilt from the ground up. All OEM parts only.!
Crank case bearings and seals
Complete gasket set
Rebuilt carb and fuel line
Near new OEM top end
Many small parts , nuts and bolts
Drive sprocket
Pull rope and handle
Saw was completely dismantled and steam cleaned, case was sent off to professional shop in OR to replace the crank bearings and seals. (rich @ myrtle creek..saw king)
Has super tight compression!! Idles and runs fantastic!
Oils properly. Would make a super milling or large stump cutter, block up saw.
100% ready to work
Located in Tremonton, UT Cash only sale. No trades
Call or txt Brig @ 435 512 1075 I prefer txt msg over pm's. Don't get to my email very often.
Watch this youtube video
Completley rebuilt from the ground up. All OEM parts only.!
Crank case bearings and seals
Complete gasket set
Rebuilt carb and fuel line
Near new OEM top end
Many small parts , nuts and bolts
Drive sprocket
Pull rope and handle
Saw was completely dismantled and steam cleaned, case was sent off to professional shop in OR to replace the crank bearings and seals. (rich @ myrtle creek..saw king)
Has super tight compression!! Idles and runs fantastic!
Oils properly. Would make a super milling or large stump cutter, block up saw.
100% ready to work
Located in Tremonton, UT Cash only sale. No trades
Call or txt Brig @ 435 512 1075 I prefer txt msg over pm's. Don't get to my email very often.
Watch this youtube video
