• Notice to all BUYERS. You are buying at your own risk. If you do not know the seller then please be cautious and look for suspicious activity. If they ask you to mail a check/money order or pay with PayPal using the Friends and Family option, that is a RED FLAG. Your purchase will not be protected. Only pay with credit card or PayPal using the goods and services options. Do not fall for the excuse that they don't want to pay the PayPal fees. They need to account for that in their sales price.
  • To all USERS that think they need to police the site. New users that come to sell items are not always selling stolen merchandise. No vigilante or lynch mob mentality is permitted. You will be given infraction points if you accuse someone of selling stolen merchandise without hard evidence. You must have the stolen item report with a serial number and/or pictures that match the for sale item to make such accusations. Alert the moderators with your evidence and they will take care of any transgressions. If you do not you will be given enough points for a 3 day time out.
  • Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors
Peak Industries


SOLD!!!! Jonsered 2166 R4 Yes It's For Sale

chipper1

chipper1

Living Life to the Full
Joined
Nov 5, 2014
Messages
32,761
Age
50
Location
GR. MI.
Whatever you do don’t ask the guy for caramel candy. That will be a big NO. But chocolate covered raisins are OK.








Sent while firmly grasping my redline lubed RAM
Lol.
She knew I was busy and was trying to get me to say yes while I was distracted, little stinker, she obviously gets that from her mom :lol:.
 
chipper1

chipper1

Living Life to the Full
Joined
Nov 5, 2014
Messages
32,761
Age
50
Location
GR. MI.
Does this saw have a base gasket delete? What sealant did you use? Do you know it's compression? Is it just like a 372xt.
Thin base gasket to adjust the squish to .020.
No, its just like a 2172 lol.
The 365/2166 have the same cylinder as the 372/2172. The 365/2166 has a restriction in the transfers that reduces the performance. This saw has had that restriction ground to make it perform like the 372/2172.

Here's a done up like this one, but it also has a muffler mod, they are great saws for running a 24". The bar and chain on the saw is the same as the ones I'm selling for $50.
Here is the same saw as the 2166 in the ad, but with the muffler mod like the saw in the video above.
 
East/West CADaddict

East/West CADaddict

ArboristSite Lurker
Joined
Nov 20, 2019
Messages
10
Age
41
Location
Pennsylkucty & California
Now you know, I'm not going to tell you again:buttkick::laughing:.
For those who don't know duce knows, he's just trying to help my sale by getting me to put info in my add that he thinks will help the sale, he's a great guy isn't he :).
Phew..... Thank good! I thought that was two guys patting each other on the back, maybe hawkwardly flirting. If I just literally just do this to my non-epa 365 to 372oe, you'd be taking my denarõ.
 
chipper1

chipper1

Living Life to the Full
Joined
Nov 5, 2014
Messages
32,761
Age
50
Location
GR. MI.
Phew..... Thank good! I thought that was two guys patting each other on the back, maybe hawkwardly flirting. If I just literally just do this to my non-epa 365 to 372oe, you'd be taking my denarõ.
He likes to give me a hard time, I try to repay the favor lol.
On the early 365oe(original edition) you have to change out the piston and cylinder as the 365oe has a 48mm bore and the 372oe has a 50mm bore. Of your going to do that and you have no plans of porting it you might as well look for a 372xpw P&C which has a 51.3 bore and makes it into a 75cc saw. But now I'm talking silly as no-one would do that ;).

What part of Cali are you from or in.
 
East/West CADaddict

East/West CADaddict

ArboristSite Lurker
Joined
Nov 20, 2019
Messages
10
Age
41
Location
Pennsylkucty & California
He likes to give me a hard time, I try to repay the favor lol.
On the early 365oe(original edition) you have to change out the piston and cylinder as the 365oe has a 48mm bore and the 372oe has a 50mm bore. Of your going to do that and you have no plans of porting it you might as well look for a 372xpw P&C which has a 51.3 bore and makes it into a 75cc saw. But now I'm talking silly as no-one would do that ;).

I was in San Jose for 15 years. 1998-2012 Right as Sandy was being a super ***** up & down the east coast. Going back to San Cruz and cutting 120 acres on my buddy's north side facing mountain.

What part of Cali are you from or in.
 
chipper1

chipper1

Living Life to the Full
Joined
Nov 5, 2014
Messages
32,761
Age
50
Location
GR. MI.
So during the week I'll be cutting & milling work/sleep in the mountains. Weekends down at his beach house for oceanside views & bikini's. Saw was $50, I spent $100 on Meteor 371/372 top end. Its only use is going to be ugly work & stumps.
I was born in southern Cal.
Right, those things don't work.
 
Top