Decent 046 I picked up a couple weeks ago. New carb kit. Replaced vent line, New stihl spikes and roller kit. I painted the stihl clutch cover. It has a new aftermarket sprocket drum and bearing. The tank handle is reinforced with PC-11 epoxy. All of the handle plastic was there but there were several cracks that I did not want to become a functional issue. The muffler is all stock. The saw has some carbon marks on the piston. It is pushing 150psi with factory gasket in place. Saw passed pressure and vac test. I ran 3 tanks thru it this weekend and no issues. I ran my 28" bar on it and pulled strong. I have several used bars in 28" 32" 20" and 24" that could be shipped separate and I have some new or used chains that fit them as well.
The saw is offered power head only for $425 plus actual shipping cost. Only partial trade I would be interested in would be a dolmar/makita 6400 and up series.
The saw is offered power head only for $425 plus actual shipping cost. Only partial trade I would be interested in would be a dolmar/makita 6400 and up series.
Attachments
-
IMG_20151212_135231.jpg681.2 KB · Views: 135
-
IMG_20151212_135256.jpg605.4 KB · Views: 137
-
IMG_20151213_140818.jpg380.1 KB · Views: 148
-
IMG_20151213_140827.jpg334.5 KB · Views: 148
-
IMG_20151213_140846.jpg277.1 KB · Views: 156
-
IMG_20151213_140852.jpg396.5 KB · Views: 142
-
IMG_20151213_141212.jpg355.9 KB · Views: 145
-
IMG_20151213_142013.jpg387 KB · Views: 113