jmscott22
ArboristSite Lurker
I am looking to sell my Stihl MS461R powerhead. This saw is very clean besides a couple issues I will mention. The clutch cover has a crack which can be seen in one picture below. On the back side of this crack I cleaned it out with a Dremel and layed down a bead of JB Weld. The crack has not got any worse since and seems to be holding well. The prior owner also etched some kind of ID into the bottom case of the saw also. It is a low hour saw. The only mods done are the factory exhaust hole opened up, limiters trimmed, and retuned. I will also include a used OEM MS460 unlimited coil that I was going to install. $900 OBO