Want to Sell Jonsered 70e Flywheel Fan - $45

[bigrichard81]

This is a new 3d printed flywheel fan that fits the Jonsered 70e (and I believe the 66e, but I haven't verified that). The original OEM pn was 504612506. This is only the plastic fan, not the metal flywheel. This part is 3D printed out of PETG and has shown excellent durability on the saws it has been placed on. Please note, you may need to take a bit of sand paper to the ID in order for it to properly fit onto the flywheel. I haven't heard any complaints about this, but please be aware given the tolerances of the flywheel itself, you may need to do some fine tuning.

 

[bigrichard81]

Just printed off a new batch of these. All red.

 

[mogulmasher]

I can vouch for these. I purchased one and it's a nice quality part. I've put several tanks of fuel through my 70e with no issues. It did need a bit of filing/sanding to fit it but it was no big deal.

 

[boxelderbarron]

i would like to purchase a couple of these. can you let me know how

 

[beavis331]

Worked great on my 66e!

 

[bigrichard81]

New batch just finished. Printed in a gray/silver this go round.

 

[bigrichard81]

Just printed the next round, all red.

 

[bigrichard81]

Just printed some more off, all in red. Still $45 shipped.