hydraulic

I've got the above stated chipper that has had the feed wheels stalling out on even small brush loads. If I use the hydraulic control for lifting or crushing while chipping I can get the feed wheels to grab and suck stuff in. I've hooked up a hydraulic gauge to to the relief block on the pv1...

For 27 ton Troy Built Log Splitter 4 hole 3400PSI 3600RPM Inlet 1" Outlet 3/4"

Hello, I have been doing some research and can not find any answers. I bought a fairly new 27 ton champion log splitter. I was using it for a few hours and then one of the hydraulic hoses shot off. This happened two more time. I removed the hose clamp, and added two new ones and have not had...

Hi All, I'm new to this group. I wanted to know if anyone had a suggestion or ever had this issue before. Log splitter 9hp BS motor, 25ton Hydraulic Cylinder on the machine(The brand isn't known). As we were using it the oil started gushing from the piston area close to the cylinder. We...

I have a skyworker boom and I had a hydro line bust inside the boom that operates the ports on the bucket for saws. due to the complex work to replace it I blocked the 2 hoses off at the hydro block at the base of the boom. my questions are. 1/ my hydro temp seems to get hot quickly and I wonder...

what type of hydraulic fluid would my 625 gravely chipper take ? Also I am leaking hydro fluid from a relieve valve from chipper and is worse in reverse from the feed wheel. Thanks for any help

On super sale. Look Here! Looks like it might be the Tecomec 136/Oregon 511A unit, in which case $100 is a freakin' steal.