1993 woodchuck hyroller WC17 in need of feed motor

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

802climber

ArboristSite Operative
Joined
Feb 1, 2009
Messages
369
Reaction score
29
Location
Vermont
Does anyone have a source for hyd. feed motors for this chipper? Lower feed roller quit yesterday morning on the job. I am getting 2250psi to the bad motor. Painfully slow progress with Altec.

Any tips would be much appreciated.


Sent from my iPhone using Tapatalk
 
Most any hydraulic shop can match up a hyd. motor if you put it into their hands. Not always cosmetically identical, but once displacement, RPM, mounting system, and shaft sizes are matched up, you are in business.
 
Thanks anyway but I ended up finding the problem. Did not realize it had keyed shafts. Just needed new woodruff keys and the set screws retightened. FWIW I found the motors through Altec in Shelby, NC. They are around 600 each +/-
08563b2465b4a0f13404aa57f43e6d61.jpg
aee81b62cf58a2f388149751faef8638.jpg



Sent from my iPhone using Tapatalk
 

Latest posts

Back
Top