Want to Sell Custom Racing Pistons 60, 62, 66 and 52mm

[stihlman036]

Racing pistons for sale, here is a list of what is in stock:

62mm- almost sold out of stock but will be taking orders to make another order very soon, pre-order to save one for you. $220 each plus shipping

60mm- 12 in stock, they fit 3120, 088, 880,084's $220 each plus shipping

66mm- 6 in stock (ehp pistons) Piston is like above but no side windows $200 each plus shipping

52mm- have lots of these, (ehp pistons) Piston is like above but no windows, must have a Nikasil cylinder $200 each plus shipping.

We'll see you all out racing this season!

 

[stihlman036]

60 in the back, 52 and 66 up front.

 

[Bobby Forrest]

I know this isn't the place to ask. What makes a race piston?

 

[stihlman036]

What makes these pistons "Racing Piston's" is a variety of thing that have been done to improve the overall performance. So here you go.. they weigh less, they are made from billet Aluminum not cast,...the two coatings reduce friction and heat, They have wider than stock skirts for bigger ports, The ring is improved over stock, and the side cut outs help direct and flow the air better through the hogged out transfers.... Now can you put these in a stock 3120, 088,880 or 084 yes... some guys have, But if you want to have a saw that is going to perform with the top motors then a custom piston of some kind you will find inside.

 

[Bobby Forrest]

Thanks for the description!

 

[skippysphins]

Is 52 mm for a husky 281

 

[stihlman036]

046, & 281 but must have a nikasil bore. So you will need stock replated

 

[skippysphins]

046, & 281 but must have a nikasil bore. So you will need stock replated

Oh I am new to wanting to do this. Where would one have this replating done ?

 

[stihlman036]

You will need to cut the head off the cylinder, then send the cylinder and brand new piston to a company such as US Chrome to get it Nik'd

 

[skippysphins]

You will need to cut the head off the cylinder, then send the cylinder and brand new piston to a company such as US Chrome to get it Nik'd

Any idea of what this would cost roughly?

 

[stihlman036]

Call them

 

[stihlman036]

More 62mm pistons have been ordered. If you want to reserve one it's $100 down and balance due before delivery. Pistons to be done at the end of April in time for Webstersprings and other early shows.

 

[stihlman036]

More 62mm pistons have been ordered. If you want to reserve one it's $100 down and balance due before delivery. Pistons to be done at the end of April in time for Webstersprings and other early shows

 

[stihlman036]

The next set of pistons are on there way here.

 

[stihlman036]

I have the next set of 62mm race pistons in. I still have 60's and 52's

 

[blsnelling]

US Chrome will plate blind cylinders. The cost is somewhere between $200-$250.