Want to Sell Husky 390xp $400

[k_kindig11]

Ok, been out of the loop for awhile, but I have a saw I'm looking to sell. It is a husky 390xp. Has it's bumps and bruises for sure (cosmetics), but seems to be a good runner still. I haven't used it in a couple years due to buying a ported 395xp. Instead of continuing to let it sit, I'll let someone else get some use out of it. It has several cracks in the plastic, has a crack in the case by the front spike (not in a place that leaks oil or causes any other problems), cylinder has a few broken off fins, and the safety lever on the handle has been removed and handle taped. I have captured pictures of everything. This is how the saw has always been in the time I owned and none of these flaws caused any problems. This was my "ugly duckling" saw but it was my daily driver until I got this 395xp. Like I said, had not been ran in a couple years but ran when parked. I dumped the gas out and put in fresh and it fired right up and idled fine after warming up a second. The starter is from a 385xp but this is infact a 390xp. Cold compression is 150. Mechanically seems to still be a good saw, but since it's sat a couple years I would suggest routine maintenance before running it every day. Sell as PHO. PayPal friends/family. Thinking $400. Let me know if you are interested.

Sent from my iPhone using Tapatalk

 

[Big Block]

Piston pic?

 

[k_kindig11]

I will try to get a pic this afternoon and post it

 

[Perfect Harvest]

Is this an x torque model?

 

[Big Block]

Is this an x torque model?

No

 

[k_kindig11]

Not an xtorq.

I tried posting the best pictures I could get with my phone. There is a shiny streak in the middle of the piston but it is not a gouge or score mark. Just a shiny spot.

 

[Big Block]

View attachment 580089 View attachment 580088 Not an xtorq.

I tried posting the best pictures I could get with my phone. There is a shiny streak in the middle of the piston but it is not a gouge or score mark. Just a shiny spot.

Thanks