Husky 55 leaking fuel any thoughts

[snipman]

Was cutting yesterday and noticed when I was filling saw, fuel was running out and down on the handle. Did some investigating and looks as though is leaking between grommet and fuel line on top of tank. I have pulled the fuel line from inside the tank and no cracks in fuel line itself. Line pulled very easy with little resistance. Does this grommet deteriorate and can it be replaced from the top of tank. Looks as though if you pull fuel line off carb you could slide new grommet on and push into top of tank. Thanks in advance for advice.

 

[HiOctane]

Ya,you can replace the grommet but you have to remove the bolts holding the antivibes first to get the tank out.And while tank out,look if the "dimes" are still inserted in the tank vent,could be leaking there too.