• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Husqvarna 390XP and 372XP Non XT

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tacomatrd98

ArboristSite Guru
Joined
Jan 17, 2008
Messages
675
Reaction score
1,033
Location
Newville, PA
As the title says, I have a 390 and a NON-XT 372 for sale.

390: The 390XP is a 2011 Model. All stock except the larger felling spikes. It has the HD filter. The saw comes with the original Husky branded oregon bar. It is 28" .050 gauge .375 pitch. The bar is in good serviceable shape. The lettering is worn off but most of the gray paint is intact. The saw runs well, starts easy, oils, idles, brake works etc etc. The muffler has a dent in it, and the top 2 screws in the recoil housing are not original. they are metric allen head though.The ones in the pic are phillips but i swapped them for allens. There are some scratches in it but overall it is a really nice saw.

Asking $700 plus shipping

372: The 372XP is a 2009 Model. Cosmetically not as nice as the 390 but it runs just as well. Fires right up, idles, oils, brake works, etc. I just bucked an entire tri-axle load of logs with this saw and it never missed a beat. Comes with the original husky labeled Oregon bar. 20" 3/8 .050 gauge. The handlebar and recoil are from and X-torque 372 but are OEM. They were on it when I got it so I do not know the whole story on why they were replaced or if it was a freak and came through this way. The muffler is modded with a 288 deflector and screen on the right hand side pointing forward. loks good and works well.

Asking $450 Plus Shipping

I have a 82dl Total pro bar I could swap onto either one, or a 24" and a 32" 3/8 .050 Sugi-Hara LW, at an extra cost of course.

I will also sell them PHO also if that is what people prefer.

SUGI's ARE NOT INCLUDED AT ASKING PRICE!!!!

Thanks,
-AJ
 

Attachments

  • 372-1.jpg
    372-1.jpg
    41.5 KB · Views: 450
  • 372-2.jpg
    372-2.jpg
    35.1 KB · Views: 449
  • 372-3.jpg
    372-3.jpg
    44 KB · Views: 417
  • 390-1.jpg
    390-1.jpg
    39.5 KB · Views: 413
  • 390-2.jpg
    390-2.jpg
    22.3 KB · Views: 379
  • 390-3.jpg
    390-3.jpg
    43.3 KB · Views: 367
  • 390-4.jpg
    390-4.jpg
    39.7 KB · Views: 358
  • 390-5.jpg
    390-5.jpg
    44.1 KB · Views: 305
Did they give you a reason?

Something to do with trying to keep the search functions valuable, in that once the C-list ads are deleted the links will still be there and if will pick up under a search and go to a dead link. My thoughts were if I delete the thread when I'm done, who cares. But thats why I'm not a moderator.

Dex, Most of the Stihl stuff I listed went already. I still have a 260 Pro and a 241cm I'm on the fence about selling...I dont need them but I dont "need" to sell them either.
 
AJ:
Would you know the compression of the 372?
Thank you.

I do not but I will check it when I get home. I checked about 15 saws in a row the other day for s&g's I want to say it was 148 but I don't 100% remember. I will let you know as soon as I can.
 
I do not but I will check it when I get home. I checked about 15 saws in a row the other day for s&g's I want to say it was 148 but I don't 100% remember. I will let you know as soon as I can.

The thinker isn't as bad as I thought...Compression is 148 psi cold. Checked it this morning. If anybody wants a pic of the gauge i can post one later. I checked the 390 at the same time and it was 148-149. just a hair higher.

-AJ
 
I'll buy the 372 PHO in a heartbeat on the extreme offchance that the current buyer and jwill for some reason decide not to buy after all. Feel free to send me a PM if the improbable happens =-)
 

Latest posts

Back
Top