McCulloch PM 380

[pafire]

I got the Power Mac 380 out today to cut some firewood. It would not run a WOT. After adjusting the carb the saw will idle, and accerlate and run good at WOT for about 15 sec. I also pulled the carb and disassembled ( thinking there may be some sawdust in the filter screen ), I'm Just looking for any ideas as to what is happening with the saw.

 

[Morgan in AR]

when mine was doing that it was out of gas. But seriously, you might check the tank vent line. it seems to have a check valve of some kind in it. Nobody seems to like these saws, I have only got limited responses from my posts on them. I really don't know why, I kind of like mine.