oltimer chain oiler...high tech reading

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

no longer collecting

ArboristSite Operative
Joined
Jul 17, 2005
Messages
204
Reaction score
48
Location
canada
Saw Oiler
When cutting any pitchy wood the sawyers would have had a bottle of kerosene with grass or pine needles stuffed in the top to lubricate the saw and dissolve the pitch. The photo here is one typical of the the State of Maine. There were other many solutions. A small amount of kerosene on the saw would dissolve the pitch, and the way to apply it was up to the creativity of the sawyer. A very traditional Oregon solution was to use a pocket flask whiskey bottle with the cork groved out a little so it would drizzle a little when shaken. The empty bottles were pletiful and easty to carry in the hip pocket while making the sometimes long hike out to the falling site.
Fallers tried to avoid the worst of the pitch seams as well as stump bind by leaving fairly tall stumps. In Oregon stumps 4 to 10 feet tall were common. Never the less every faller had a story of the big pitch seam that he hit. Usually the 'big one' contained pitch measured in gallons. When a seam like that was hit, the falling operation would be abandoned until the pitch drained out.
While they were sawing, particularly if pitch was bothersome, the bottle would be hung above the saw so it would drip on the saw.

PS: The only thing they dont talk about is what happened if the logger was a cigar smoker....you could hear a loud "BOUMMMM" and wonder if the tree actually fell or if there was an explosion blast at the stump....lol

I do have a Mall 6 that uses this technique.
I will send pictures if the rain can stop.

....... Alain,
 

Latest posts

Back
Top