Sold Or trade Stihl 290/310/390 parts for husky 350 parts

[GeorgiaVol]

I have 3 or 4 engine housings, a couple cranks, clutches and flywheels, some starter covers, clutch covers, top covers, 2 trigger/handles, maybe a few other parts for trade on some husqvarna 350 parts. I need carbs, tanks, ignition parts, clutches, sprockets, mufflers, intake parts, any other small parts.
Anyone up for trading?

 

[GeorgiaVol]

Could also use some husky 55 parts . Coils, intakes, carbs, mufflers, clutches, sprockets

 

[Brandon owenby]

I have a couple good 350 tanks a clutch cover or two, top covers for 340 but I'm pretty sure that they will match the are without the primer bulb, I know i at least have one coil, a couple sprockets and quite a few smalls.
For the 55 I know i have at least one carb possibly 2, same for coils, maybe a carrying handle, a muffler or two possibly some heat shields and spikes for both.
I need 2 carrying handles, a front handle/housing need it to be complete doesn't have to include the carb, A/f cover, starter assembly,(which reminds me I have a starter assembly for the 350) flywheel brake guard hardware and cover.
I can send you pictures of what I have within the next couple of days working away from the house. Let me know if your interested and let me know if you have what I need. Thanks

 

[cuinrearview]

I have some things too. Just PM me with specific needs. I don't need Stihl stuff, but we can get your 350s going.

 

[GeorgiaVol]

I have a couple good 350 tanks a clutch cover or two, top covers for 340 but I'm pretty sure that they will match the are without the primer bulb, I know i at least have one coil, a couple sprockets and quite a few smalls.
For the 55 I know i have at least one carb possibly 2, same for coils, maybe a carrying handle, a muffler or two possibly some heat shields and spikes for both.
I need 2 carrying handles, a front handle/housing need it to be complete doesn't have to include the carb, A/f cover, starter assembly,(which reminds me I have a starter assembly for the 350) flywheel brake guard hardware and cover.
I can send you pictures of what I have within the next couple of days working away from the house. Let me know if your interested and let me know if you have what I need. Thanks

awesome! I will get them out today or tomorrow and snap some pictures

 

[GeorgiaVol]

I have some things too. Just PM me with specific needs. I don't need Stihl stuff, but we can get your 350s going.

Thanks! Just have a few projects laying around I need to get running so I have room for a few more. Lol

 

[GeorgiaVol]

I also have some misc Stihl and Husky parts
066 top cover and carb box
361 starter cover
045/056 clutch cover
Husky 435 top cover
288 top cover (has a 1" crack at the muffler side)
40 chain brake and top cover (dark grey top cover model)

 

[Brandon owenby]

Um no my projects right now are
017 just a few smalls.
025 flywheel, brake guard, band, and hardware.
034s/036 piston, muffler
026 44mm piston, fully adjustable carb wt-194 I believe, choke rod.
029S carrying handle
029 engine cover/handle full assembly (does have to have the carb), carrying handle, coil, brake guard, band, spring, ect.
2 262 would like to have another KS or even mahle non decomp, top covers, A/F cover, any other smalls. Let me know what other builds you have I might have a random part here or there.

 

[GeorgiaVol]

I should have the trigger handle/cover, but no carb for a 290 and might have the brake pieces.
I don't think I have any of the rest though.

 

[GeorgiaVol]

Here are most of the bigger parts I have. I could probably find another flywheel or oiler or brake parts, but I don't have any carbs or other covers or coils.

 

[GeorgiaVol]

Or if someone just wants the whole lot for $125 plus shipping that works too.

 

[Brandon owenby]

Here is what I have for the 350 I have a 340 crankcase not sure if they interchange or not. Here is a 55 if interested I just need the tank for a 262 build. I also have a 55 muffler, a 350 coil, and a hda-199 for a 357xp but will work on the 350. Let me know if you're interested in trading anything.

 

[GeorgiaVol]

I can sell individual pieces if that helps
Engine housings $20 each or $10 for the slightly damaged one
Handles $20
Starters $15 covers $5
I found 3 cranks $25 each
Clutches $10
Flywheel $10
Oilers $5
The Misc brake band, spring, screws etc, $10
A cylinder/piston that needs slight cleanup (290) $15
All prices plus shipping

 

[GeorgiaVol]

Sold pending payment