Promac 310 Crank seals. Does anyboy have a CR or SKF #?

[farmhard]

Hi All,
Repairing some 310's that are erratic and hoping to buy seals before I clutter the kitchen.
I can't seem to find an IPL, does anybody have a place to buy these OR a CR number?
Of course I can pull and measure to cross but then there is shipping delays and I'm plowing through jobs getting ready for snow.
Thanks in advance

 

[heimannm]

I have a large supply of NOS seals (83859, 67175, 63476) reasonably priced if you are interested.

Mark

 

[farmhard]

I have a large supply of NOS seals (83859, 67175, 63476) reasonably priced if you are interested.

Mark

Can you pm me with shipping please either to 14211 NY or L3C 6A2 Ontario pls?

 

[heimannm]

Done

 

[farmhard]

I have a large supply of NOS seals (83859, 67175, 63476) reasonably priced if you are interested.

Mark

Sorry to ask but I see that P/N for 110,20,30 and 140. It will work on 310"s? Thanks again.

 

[heimannm]

Yes, the same seal with different part numbers was used on all of the small saws, PM6, MM, 300 Series, and the 32/35/38cc models assembled in Mexico.

Mark

 

[farmhard]

Hi Mark, according to the tracking they arrived. I was in town yesterday, next trip back will be a bit. Thanks for your help!