• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold STIHL MS 200

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 26, 2016
Messages
509
Reaction score
830
Location
Hungary
Nice STIHL MS 200 chainsaw. Starts and runs.

Asking $270 shipped bar and chain included.
 

Attachments

  • 20171019_131946.jpg
    20171019_131946.jpg
    2.9 MB · Views: 49
  • 20171019_132119.jpg
    20171019_132119.jpg
    2.7 MB · Views: 46
  • 20171019_131952.jpg
    20171019_131952.jpg
    2.5 MB · Views: 48
  • 20171019_132004.jpg
    20171019_132004.jpg
    2.6 MB · Views: 45
  • 20171019_132019.jpg
    20171019_132019.jpg
    2.1 MB · Views: 43
  • 20171019_132418.jpg
    20171019_132418.jpg
    2.5 MB · Views: 44
  • 20171019_132053.jpg
    20171019_132053.jpg
    2.9 MB · Views: 41
  • 20171019_132109.jpg
    20171019_132109.jpg
    2.7 MB · Views: 41
Will be my new liming saw, all the others I have are feeling heavy at age 63. LOL!
Great saw for that except you have to bend over to cut with them.
It's nice if you can fell the tree so it stays on the stool, then strip the branches while it's off the ground a bit, then come back with a larger saw and buck it up.
These are great saws at the end of the day for us younger guys too :).
 
:)
Great saw for that except you have to bend over to cut them.
It's nice if you can fell the tree so it stays on the stool, then strip the branches while it's off the ground a bit, then com back with a larger saw and buck it up.
These are great saws at the end of the day for us younger guys too :).
I use a ms261 now with a 18" on it. Remember the older you get the shorter you get.:)
 
:)
I use a ms261 now with a 18" on it. Remember the older you get the shorter you get.:)
That's funny, sort of, I'll have to keep that in mind lol.
I've got a couple 241's I use for the smaller stuff and a 201 rear handle. the main downside is bending over with a 14". I've threatened a few times to sell them both 241's and get a ported 241 to take their place, but it's only be threats so far.
 

Latest posts

Back
Top