Search results

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Andyshine77

    RIP Treeslingr'

    I just cough wind of his passing. May he RIP
  2. Andyshine77

    RIP Gypo Logger {John Lambert}

    I found this old video in a bunch of old files on my hard drive. The video is unlisted but the link should work. John running his 7900, I think it's an EHP.
  3. Andyshine77

    RIP Gypo Logger {John Lambert}

    Which way to the BEACH??
  4. Andyshine77

    RIP Gypo Logger {John Lambert}

    Very sorry to hear of his passing! John always provided a good laugh, entertainment and experience, all nearly 20 years ago now. My how time passes.
  5. Andyshine77

    Two-Stroke Oils: All the Same?

    In some cases richer. Nonetheless the difference is small, as most of the oil falls out of suspension anyway, if it didn't the engine wouldn't have proper lubrication.
  6. Andyshine77

    Two-Stroke Oils: All the Same?

    Oils that are JASO FD certified will have the certification emblem and number. Saying meets or exceeds a certification is just marketing. This is not to say oils without certification are poor quality oils. This is what the emblem looks like on oils that are actually certified.
  7. Andyshine77

    372x-torq throttle cable

    Make sure everything is seated properly, like the cable sheath.
  8. Andyshine77

    Ironhorse

    I will comment when ever I want to and how ever I want, you fanboys are alway a trip. The info on who IH burned is all over another site for anyone to see.
  9. Andyshine77

    Ironhorse

    Someone brought it up Ed. I'm not shy to call out scammers, too many were kept around and burned guys, much like this IH fellow. :cheers:
  10. Andyshine77

    Ironhorse

    Must mot be him. There was a guy that burned a bunch of guys, someone tracked him down and retrieved a bunch of saws.
  11. Andyshine77

    Ironhorse

    I still have two saws he built for me. He helped me out a lot, chains, porting tips and other things. For me though if you burn me once...
  12. Andyshine77

    Ironhorse

    If I got it right Russ was near Canada and at one time was helping get saws back and forth to Ed to reduce shipping costs. Unfortunately I can't go back and look at all the names, all that was lost in the hack. I could have the name mixed up, again this was like 18 years ago.
  13. Andyshine77

    Ironhorse

    No, water under the bridge long ago. Although Russ, AKA Jokers was a straight up crook. But again this was almost two decades ago.
  14. Andyshine77

    Ironhorse

    Newer saws with strato engines are pretty good when it comes to muffler port size, the last of the non srtato saws were terrible, the 660 comes to mind with the pencil size port. Not all saws gained much from a MM, most did, espically in the early to mid 2000's
  15. Andyshine77

    Ironhorse

    DD? Most of his saws were over ported, here and there they were awesome. Brad was tread pretty poorly by quit a few people and he was attacked by a mob, so he quit, plus he had major health problems. BBR seemed like a decent person when I met him, no idea why he pushes IH, likely the free...
  16. Andyshine77

    How I baby my 2 stoke motors.... 30-1 instead of 50-1

    More oil will not cause more deposits in the ring grooves, in fact the opposite.
  17. Andyshine77

    40:1 mix ration on m-tronic saw

    You get more compression with more oil, do to better ring sealing. More oil does not cause more heat, the stuff you see on the internet/Youtube do not even have the basic scientific controls, such as tuning for each oil, obviously a non issue with TA and Mtronic models. The auto adjusting...
  18. Andyshine77

    Husqvarna 592xp when's the next drop coming? :)

    🤣🤣 haven't been on here in months 🤣🤣 The saws are placed where the center of weight is, move them off that and they will fall off the scale. I also weigh the saw lift it and weigh it again..
  19. Andyshine77

    Hands-On Experience 592XP

    They say a lot don't they. I have both the 661 and 592, pick one and cut, they're both equals in my book. The 592 sounds better, better throttle response, but power wise they're too close for me to care.
  20. Andyshine77

    Hands-On Experience 592XP

    Prices have gone way up on all Stihl equipment.
Back
Top