NE 346XP - Affects of Cat Muffler & Muffler Mod - Porting & Popup To Come

[Trigger Man]

Birch that size turns into good firewood when dry, so I don't leave tops and branches that size in the woods....

Same here, thats wastefull, but tell that to the guys running harvesters.

 

[blsnelling]

Brad,

Are you doing this for Niko's benefit? He's the only one that would cut wood that size.

Carry on,

ole joat

 

[Trigger Man]

I put those numbers into the search on Baileys web site nothing came back. Then I typed in the names and was able to find the deflector but I am still not able to find the screen. Can you recommend a supplier? Thanks

Use the same # for the screen that is on the original muffler port, I would think it would work.

 

[blsnelling]

I put those numbers into the search on Baileys web site nothing came back. Then I typed in the names and was able to find the deflector but I am still not able to find the screen. Can you recommend a supplier? Thanks

Their search engine has a few bugs. Here they are. Fire screen, Deflector

 

[blsnelling]

Use the same # for the screen that is on the original muffler port, I would think it would work.

I wouldn't recommend that. This screen fits the deflector exactly with holes for the bolts and all.

 

[blsnelling]

Is the unlimited coil a must for the muff mod?

It's not "required" even when ported. It just means that you have no way of tuning other than in the wood. You can't tune with a tach or by ear unless you replace it. For those reasons, I will not mod one of these for someone unless they're willing to spend the extra $40 for a used OEM coil.

 

[Trigger Man]

It's not "required" even when ported. It just means that you have no way of tuning other than in the wood. You can't tune with a tach or by ear unless you replace it. For those reasons, I will not mod one of these for someone unless they're willing to spend the extra $40 for a used OEM coil.

Thanks for the answer Brad.

 

[blsnelling]

I'm off to the bench to start grinding. Wish me luck

 

[Trigger Man]

I'm off to the bench to start grinding. Wish me luck

Be sure to video the results.

 

[Trigger Man]

Quick anyone in Ohio run up to Brads saw horse and put a big stick on it! with a red bow tie!

 

[lone wolf]

Quick anyone in Ohio run up to Brads saw horse and put a big stick on it!

i can see why he dont have any

 

[mdavlee]

Man I want one of these saws more and more when stuff likes this gets shown.

 

[lone wolf]

Man I want one of these saws more and more when stuff likes this gets shown.

i just got mine and didnt get a chance to see it go but i can tell its very snappy

 

[Woodcutteranon]

This is the most fun I have had reading a thread in a while!

 

[porsche965]

Regulations are ruining this country....

 

[lone wolf]

Regulations are ruining this country....

and a lot of ignorant people

 

[blsnelling]

Quick anyone in Ohio run up to Brads saw horse and put a big stick on it! with a red bow tie!

That would be majorly appreciated Make it about 12" hardwood if you don't mind

 

[lone wolf]

That would be majorly appreciated Make it about 12" hardwood if you don't mind

thuht u were porting

 

[lone wolf]

thuht u were porting

you might start cutting your own trees down soon just to test your saws opcorn:

 

[mdavlee]

I've got a piece off the other end of the log I've been testing in. It's probably 16" or so on the small end. It would be a long drive to do it before he went to bed.