Mn,wis,ia-gtg 10-09-10

Treestuff
Rugged made
Shop deals on ebay
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
grandpatractor said:
We should end up with about and 8" pine for the little saws and some 12" to 16" squared up oak for the big ones.Might have one bigger one for the really big saws.
Click to expand...

If you end up short on a size let me know. I can cut some out also.
 
I'm in. I think Heavy Fuel and I gotta go head to head with our modded 90cc Stihls, both with 32 inch 3/8. Fun times! :D
 
StihlyinEly said:
I'm in. I think Heavy Fuel and I gotta go head to head with our modded 90cc Stihls, both with 32 inch 3/8. Fun times! :D
Click to expand...
More of them other German built saws coming:clap:I have got one MS361 with a MM and one thats stock coming.Hope you know it would be at least a three way with the 066/660 ported saws,look at Thor's Sig he's got one that will give you and Heavy Fuel a run for your money anyday:jawdrop: I have my old logging buddy coming that would like to run an 038.He had three of them over the years and loved them all.
 
Last edited:
woodyman said:
More of them other German built saws coming:clap:I have got one MS361 with a MM and one thats stock coming.Hope you know it would be at least a three way with the 066/660 ported saws,look at Thor's Sig he's got one that will give you and Heavy Fuel a run for your money anyday:jawdrop: I have my old logging buddy coming that would like to run an 038.He had three of them over the years and loved them all.
Click to expand...

My saw has been talked up now and will be dissapointing if it doesnt perform.
 
Thorcw said:
My saw has been talked up now and will be dissapointing if it doesnt perform.
Click to expand...

Fricking excurses. YOU will be the disappointment if your saw doesn't perform. Most performance issues are, after all, operator error.

Uh, I've heard. :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange:

Ahhh, who gives a ####. We're just running our mouths and running our saws. It's what we do. We've only each got one mouth, but lots of saws. I don't give a fat #### whose saw is faster than whose. In the real world it doesn't matter. In the virtual world, we can talk smacksaw all day long and never find a winner. :)

It'll be good to hang with the guys from the charity cutting this spring, as well as meeting the folks who weren't able to make it. Wish I didn't have to travel 4.5 hours again this time, but I doubt anyone would come this far in my direction if I put on a GTG in Ely. Not to mention we ain't got any hardwood up here worthy of a 32-inch bar.

I'll probably only bring my 3 saws over 70cc. Who cares about the tiny tits? Well, that 034S isn't tiny. It may not fill a D cup, bit the nipples DEFINITELY got game. OK, it can come and play, too. :D :D
 
Last edited:
Saws and t!t$ are the same, get your mits on some and you'll want to play with em all, large or small.

Did I just type that? Tsk,tsk grandma would say. Must have been the mad cow.
 
Well things are coming together.Play Station is done and I hope it's a crowd pleaser,Thor will let you all know Sunday night.I got four good size red oaks ready to come down,the one we will take down Sunday will need some clean-up as the crown will land on the dirt road that comes off the main tar road back to where all the cutting will be done.I have the garage all figured out,just have to clean it out.I have a couple large tarps that could be used to cover the skidsteer trailer where the saws will be kept in case we get any rain.I just want everyone to be carefull in the Play Station and watch your step and be aware of whats around you.The first thing that will be happening in the morning will be dropping a willow across the creek for a bridge if anyone is up to something like that then open up the Play Station.There won't be any firewood cutting and splitting in the morning like at grampatractor's GTG it will be eating,BS'ing,playing and racing all day.
 
I went out tonight after work and found the GTG tree that we will be cutting down Sunday should fall not on a road but in an open area and close to the brush pile:clap:I did not measure the tree except for putting my arms around it and there was a foot between my finger tips and I have long arms.
 
This sounds like a good time

Never been to a GTG, but it sounds like a darned good time. Got a new saw on the way and if the date fits my cutting schedule here at home I might try to get down there.
 
Thorcw said:
You should its a blast is it sunday yet craig?
Click to expand...
.
The tree we will cut down on Sunday will fall right across in that open area where you cut the other one down.I think my old logging buddy will come out in the morning with his 8 wheel drive ARGO.If he does you have to go for a ride,you can't get it stuck.
 
woodyman said:
.
The tree we will cut down on Sunday will fall right across in that open area where you cut the other one down.I think my old logging buddy will come out in the morning with his 8 wheel drive ARGO.If he does you have to go for a ride,you can't get it stuck.
Click to expand...

Well Ill have to put that to the test.
 
Well Thor made it over today and took down a big red oak with his ported 066.He also brought his ported 359 and his stock 7900.He dropped the big tree right where I asked him to,it was a perfect drop:confused:We got 4 15' logs out of it for the GTG and pilled all the brush and we made 4' of cookies on the but end.Thanks,Thor.
 
Getting pretty excited. Any pics of the area? Couple guys from the south side of St Paul stopped in to pick up some parts saturday, said it is beautiful country up there. O ya and a long drive from here ha.
Every weekend I get more saws running. Hope I don't run out of room.
 
Big wood

I saw you are having a gtg and I was thinking that I have a property with a fallen oak that might even be big for my 076 stihl with a 33 inch bar. I was going to leave it alone in Maple grove MN but would you want it for the gtg?

Matt
 
woodyman said:
Well Thor made it over today and took down a big red oak with his ported 066.He also brought his ported 359 and his stock 7900.He dropped the big tree right where I asked him to,it was a perfect drop:confused:We got 4 15' logs out of it for the GTG and pilled all the brush and we made 4' of cookies on the but end.Thanks,Thor.
Click to expand...

You guys will like the ###########
 

Latest posts

Back
Top