Somthing you just have to see

[Deets066]

I haven't had a chance to run it yet, I need to get a helper handle. Its all I can to just to pick it up!

 

[redoakneck]

Helper handle??? How many of them genny lights you gonna feed the helper handle holder to brave 'em up a little?

Is that an 088/880?

 

[Deets066]

Can never turn down free beer (Genny light) first one is terrible but after a few you can't tell the difference!

Its an 088 with a muffler mod

 

[o8f150]

that will make one helluva limbing saw:hmm3grin2orange::hmm3grin2orange:

 

[Deets066]

almost as good as a pole saw:biggrin:

 

[redoakneck]

Funny how free stuff just tastes better!!!


Dude, be careful, that thing looks kinda scary

 

[Deets066]

I was going to order a helper handle from madsens, but I figured I would ask you guys first if anyone has used these or should look at a different kind?

 

[powerking]

You'll put an eye out with that thing! You should need a special license to run that big of a bar!
Rich

 

[chainsawcircus]

Nice stup, the thought of sharpening it does seem rather intimidating though.

 

[Deets066]

I made a chain for it the other day, its 206 dl of .404!! Full skip square ground

 

[Modifiedmark]

Nice stup, the thought of sharpening it does seem rather intimidating though.

Keeping the end of it out of the dirt looks like a challange as well..

 

[Deets066]

that is where the handle comes into play

 

[Job Corps Tree]

Nice saw could have used that for Elm removels in Arlington Hights Used to get flish cuts at 73 inches there Looks Great

 

[Deets066]

This would definatley work, its an 84"

 

[Deets066]

so any opions on a helper handle?

 

[showrguy]

so any opions on a helper handle?

yea,
my opinion is what kind of knucklehead are you gonna find to stand at the other end and hold on to it ???
sure would'nt be me...
looks cool though..

 

[7oaks]

So - where'd you get it and why? :msp_thumbup:

 

[MechanicMatt]

Do you have a brother in-law you don't like and thats why you need a helper handle? I can't imagine any sane person wanting to be on the nasty end of a 880, hell i don't want to be on the wrong end of any saw! Sure does look bad @$$ thou

 

[homelitejim]

I had a 120DL .404 chain made and about passed out when I got to the register. I can't imagine paying for 200. I love those GB titanium bars and will be ordering one for my ms260.

 

[Deets066]

So - where'd you get it and why? :msp_thumbup:

Bought it on ebay from the united kingdom, why??? um.... not sure, cause I have a saw big enough to run it! I do have some oak trees to cut down that this bar won't go all the way through