Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
bigblockburris
ArboristSite Operative
komatsuvarna
Arboristsite MVP
Looking for a nice looking clutch cover for a 51 Husky. Paypal to trade.
bigblockburris
ArboristSite Operative
Looking for 24" Poulan/Echo or homelite mount bars.
Also looking for Poulan 306/245 bucking spikes and Poulan 3000-3300, pp365 etc rim drive clutch drums.
Let me know what you got and what you need.
Also looking for Poulan 306/245 bucking spikes and Poulan 3000-3300, pp365 etc rim drive clutch drums.
Let me know what you got and what you need.
forestryworks
Addicted to ArboristSite
Trade this full wrap for a 046/460 Stihl 3/4 wrap.
This full wrap will fit an 044/440-046/460.
It's a good, well-built, and stout handle. Made by Metals406. Nothing wrong with it, I just prefer the Stihl handles.
Here's how it looks on the saw.
This full wrap will fit an 044/440-046/460.
It's a good, well-built, and stout handle. Made by Metals406. Nothing wrong with it, I just prefer the Stihl handles.
Here's how it looks on the saw.
Last edited:
cutfast
ArboristSite Operative
WTB 036 Pro cylinder cover and chain guard.
I'm looking for a cylinder cover and chain guard for a Stihl 036 Pro.
They don't need to be new but would like them to look nice.
Let me know what you have and how much shipped to WI. 53508
Thanks Ron
I'm looking for a cylinder cover and chain guard for a Stihl 036 Pro.
They don't need to be new but would like them to look nice.
Let me know what you have and how much shipped to WI. 53508
Thanks Ron
Eccentric
Mister Wizard
My young Homelite friend, I suggest you contact bigblockburris about the Homelite XL12 pictured below.
Any body see anything they need?
3120, Husky 66, Solo, 041 and small Homelite are already gone. Weedeater too!
Whats left:
-Craftsman 1.8 (In a box, but appears complete)
-Cinder Block Mac
-Pro Mac 435 (P&C look good, and it has spark)
-Homelite 240
-Poluan 2055
-Poulan 2300 (Very clean)
-Mac Super Pro 40
-Mac 300 Complete with a 18" Mac bar
-Mac 1010
-Homelite XL12 with Homelite bar
I will trade on about anything.
I also have a couple of small mount Husky bars, 18"-20", .325 and 3/8 with chains.
What I need:
-A NICE 029/290 series clutch cover
-16" or 18" Stihl bar, .325
-Air filter and air filter cover for a 036
Thanks!
BBB
I suggest you hook up this fine young man with that nice looking XL-12, assuming the P/C are in good shape. He's just starting out in this fine hobby/obsession of ours, and has two XL-12 saws with roached P/C's.
Any body see anything they need?
3120, Husky 66, Solo, 041 and small Homelite are already gone. Weedeater too!
Whats left:
-Craftsman 1.8 (In a box, but appears complete)
-Cinder Block Mac
-Pro Mac 435 (P&C look good, and it has spark)
-Homelite 240
-Poluan 2055
-Poulan 2300 (Very clean)
-Mac Super Pro 40
-Mac 300 Complete with a 18" Mac bar
-Mac 1010
-Homelite XL12 with Homelite bar
I will trade on about anything.
I also have a couple of small mount Husky bars, 18"-20", .325 and 3/8 with chains.
What I need:
-A NICE 029/290 series clutch cover
-16" or 18" Stihl bar, .325
-Air filter and air filter cover for a 036
Thanks!
BBB
how about the stihl saw looks to be a 028 or somthing like it. it's in the first picture up next to the little yellow saw? Is it still up for grabs? Is the gray top husky still up for grabs also?
Last edited:
jimbo1490
ArboristSite Guru
I'd make a STRONG suggestion to stay FAR FAR AWAY!!! THEN.....
Catch & Release; Catch & Release:
Repeat after me:
Catch & Release
Do not collect: Buy, hold, sell.
Jimbo
Eccentric
Mister Wizard
How about you lay low for a while and contribute some more to the board? Not talking money. You may have "bought" your way into the good graces of the AS board "high up's" through the "site sponsor" donation, but your track record for trustwothyness ain't so good still. ALWAYS looking to GET something from the generous folks here THAT YOU TRIED TO TAKE ADVANTAGE OF THROUGH LIES.............................is NOT doing anything to change people's minds about somebody that LIED to try and get BACK here after being BANNED for LYING AND TAKING ADVANTAGE OF PEOPLE'S GOOD WILL.
Sorry folks. I've been wrestling with this since he bought his way back here a week or two ago. I've been holding my tongue. Seeing him posting in a "help" thread (the Stumpy raffle thread) REALLY pissed me off, since he tried to take advantage of our good will with a FAKE sob story that resulted in a "help" thread last year. We were starting to do a raffle and gather money when the TRUTH came out. He was banned, then came back under another name, then got banned again, then bought his way back with a "site sponsor" donation. I'm sure I'm risking being banned here, but I am EXTREMELY put off by the apparant lack of concern the AS admin people have for the concerns of the LONG TIME members who were TAKEN ADVANTAGE of. I held my tongue for the sake of Stumpy's thread, but couldn't do it any longer. Oh well. Rant off....:rant:
Last edited:
How about you lay low for a while and contribute some more to the board? Not talking money. You may have "bought" your way into the good graces of the AS board "high up's" through the "site sponsor" donation, but your track record for trustwothyness ain't so good still. ALWAYS looking to GET something from the generous folks here THAT YOU TRIED TO TAKE ADVANTAGE OF THROUGH LIES.............................is NOT doing anything to change people's minds about somebody that LIED to try and get BACK here after being BANNED for LYING AND TAKING ADVANTAGE OF PEOPLE'S GOOD WILL.
Quit beating around the bush Aaron. Just let it out bro.:msp_tongue:
And what raffle was that or may i ask? If it was the one with someone with cancer or somthing it was not me. and if you could refreah my memory Please it would be greatfully apperciated
Last edited:
Mastermind
Work Saw Specialist
I concur.......tell us how you really feel Aaron.
You know whats wrong with that dude Randy?
Rhubarb deprivation.
Aaron: Use the 'Ignore' feature in the control panel.
I did..................................................................................
I did..................................................................................
Mastermind
Work Saw Specialist
I bet you're right dude. This ain't nuttin a damn good rhubarb pie wouldn't fix.
Ain't that the truth. My mom made the best rhubarb pie. :msp_thumbsup:
Mastermind
Work Saw Specialist
We've made rhubarb jelly too. My FIL had some big plants of it down the side of his garden. Now he's gone and so is the rhubarb.
Nope. My Mom makes the best rhubarb pie. :msp_tongue:
