roncoinc
Official Stihl Disser
Got some parts off well used pulp saws.
pine pitch was left on from day one and built up plenty thick.
downright NASTY !!
heres a pic of one showing the black built up gunk that had also made it's way into the inside along with the usuall buildup that get's there..
i had three of these starters to do so i experimented with one and it came out so good i did the other two..
after cleaning the outside of the first one i turned it over and cleaned the inside..
that worked so well i did the other two both sides at the same time and it worked well.
i cleaned these outside below freezing..
all thats needed is warm water and a soft brush to get all the gunk off and leave the plastic looking like new..
i took the insides apart to clean the starter spring and parts too ..
Im talking NO work cleaning here,spray it on and water and brush it off.
i found letting it sit on a couple hours or more was no problem..
here are the parts.
rinsed and dried.
No polishing or anything !!
didnt bother the logo at all.
even the soft white plastic recoil spring holders came out clean and nice.
i found the same thing cheaper at the box stores instead of the grocery store.
use OUTSIDE !!
dont breath it.
wash hands after..
I dont know how it would work on Stheal plastic,it may be to cheap and soft and melt..
heres what i used..
pine pitch was left on from day one and built up plenty thick.
downright NASTY !!
heres a pic of one showing the black built up gunk that had also made it's way into the inside along with the usuall buildup that get's there..
i had three of these starters to do so i experimented with one and it came out so good i did the other two..
after cleaning the outside of the first one i turned it over and cleaned the inside..
that worked so well i did the other two both sides at the same time and it worked well.
i cleaned these outside below freezing..
all thats needed is warm water and a soft brush to get all the gunk off and leave the plastic looking like new..
i took the insides apart to clean the starter spring and parts too ..
Im talking NO work cleaning here,spray it on and water and brush it off.
i found letting it sit on a couple hours or more was no problem..
here are the parts.
rinsed and dried.
No polishing or anything !!
didnt bother the logo at all.
even the soft white plastic recoil spring holders came out clean and nice.
i found the same thing cheaper at the box stores instead of the grocery store.
use OUTSIDE !!
dont breath it.
wash hands after..
I dont know how it would work on Stheal plastic,it may be to cheap and soft and melt..
heres what i used..
maybe if i turn the can upside down it will work the other way !! 
