All in one Stihl bar adapter.

[Homelite410]

Got my adapter yesterday. Thanks Mike

Anytime, Lemme know if there is anything I can help you with in the future!

 

[cgraham1]

Thanks again for the great service!
Clint

 

[CR888]

Homelite410 makes really cool chainsaw stuff!

 

[Lurch2]

Bringing a pile of adapters to the GTG? I need to pick up a couple.

 

[bigjl71]

Looks to me you could also add the Echo CS-5500 to the list of saws that could use it....I had this saw before and the only bar and chain set-up you could run was their darn safety chain and bar, but after making a little cruder gadget than these, I was able to run a Stihl or Oregon bar and an aggressive chain.......I thought for the size of the 5500 it should cut a lot better, and after the mods it was like night and day, the CS-5500 became a pretty good saw to cut with....If I get time to work on the few I have setting around the garage I'll be ordering a few...looks like pretty good work...

 

[watsonr]

Mike,
Looking to make a deal on a handful of these. The adapters I now get cost me to much and they don't fit everything... looking for something like 20 or more.
PM me some details please.
Randy

 

[psuiewalsh]

I picked up a couple 12mm and 14mm adapters from Mike. The 12mm work great on my 372, 288 and 395. The 14mm fits the 3120 well.

 

[psuiewalsh]

 

[psuiewalsh]

 

[inventtis]

Since some of you have some machining skills, have any of you considered making some custom 12mm studs for the bar conversion instead of the adapter? If you modeled them off of the new ones on the Stihl 441, that would be an improvement, making bar changes easier.

 

[Homelite410]

That's a fantastic idea but if you wanted to switch back you have to pull the studs. These allow you to run both mounts on the saw.

 

[tifnbrian]

All I want is the homelite adapters!

 

[Eccentric]

I need to buy a couple more 12mm Husky adapters...............and I still eagerly await the 12mm Homelite, 12mm Poulan, and 14mm Homelite/Mac adapters.


Hiya Mike!opcorn:

 

[AuerX]

I have no need for your wonderful products but who knows, Maybe one day I will!

Thanks for the time and effort to help out a lot of people with quality work.

 

[Homelite410]

I have no need for your wonderful products but who knows, Maybe one day I will!

Thanks for the time and effort to help out a lot of people with quality work.

Thank you! One never knows when they will stumble upon a stupid good deal on a bar that may not be the right mount! I had a guy give me a new Windsor 28" stihl mount and it works perfect on my Jonsered saws with my adapter. All of my original pictures are actually of that bar at the beginning of this thread!

 

[heyduke]

here's how i do it

drill for bar studs and plate screws



check fit



cut to length



file/grind to fit 12mm and radius



check again



done

 

[cgraham1]

Not worth all that work to me. The time it would take me to do that is worth more than the $12 Homelite410 charges for his adapters, and his are much nicer.

 

[heyduke]

Not worth all that work to me. The time it would take me to do that is worth more than the $12 Homelite410 charges for his adapters, and his are much nicer.

sorry hombre, i wasn't offering to sell you anything, just showing you my method. i hope you buy lots of nice stuff.

 

[AuerX]

here's how i do it

Pretty cool way to go about it.

There is room for all kinds of solutions in this world and the more we are aware of the better off we are.

 

[Homelite410]

Today's run!