stihl041avhog
ArboristSite Guru
Got a ms441 with a no spark issue. I fixed that by installing a new coil. I ran the saw for a few minutes , no bar and chain. Gave it to the customer thought all is good. Came back with a broken pull rope and a crankcase full of fuel. How does that happen. I'm sure the needle got stuck open by trash but why did it flood the case. I have seen a many of float carbs on lawnmowers do that. I'm going to clean the carb and install a new kit. Question will it hurt the bearings in the bottom end. I fill it with some cheap 2cyl oil and let it sit for a day and then drained that. Any pointers before starting it. He did say he pulled about twenty times before the rope broke.PS the bg55 is going into the fire pit if the fuel line checks good.