whadja do today?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Its not cold enough for liquor and not warm enough for beer so I stopped for a case of wine on the way home, going to make a fishy Caesar tonight accompanied with a California chardonnay then hope to warm my chilly nose betwixt a supple set of asscheeks. They want me back for one more day tomorrow down in that **** hole which I am not thrilled about but that only serves to prove my theory that freewill is an illusion.
 
You gonna clean up all that other crap laying about everywhere in the first couple pics, or just keep rolling along? Looking good.

No, I am just felling and chipping what my little 90 will get, they have been tossing the thing around down there with that monster of a Bobcat and will come in with some kind of brush hog after I leave. They broke the grapple bucket a couple days ago, had it fixed this morning but I wasn't around for any of that.

I think we uncovered an old still condenser, a couple pre-war washing machines, and a promising harrow plow. We built one bridge out of chips and one out of hickory logs.
 
How do you like that terex chipper chris? And is it a 730 or 750
That one is a TAC 730 they just bought that a few months ago. I haven't really worked with this chipper much be it seems pretty nice and is much better than the Vermeer they traded in. They must like it though because they want to buy a few more.
 
Spring has return-eth. Hallelujah, hallelujah!
56b73127c113acb4194d1c61c6f3dcfe.jpg
147c9c3197f1e7884e4ce9dff6ad8b73.jpg
77687a94efee5726101b9f3d1c8fa425.jpg

Dead maple in the a.m. no money for complete removal, so half removal it is.
9e75b88d9a79cee18065671ee695db11.jpg
f87b2d4857910bae013fc3bdfc497089.jpg
d1cb4de1a56609299288c220e40c5385.jpg
07ac9062b8bb7edd1766b03167087a25.jpg
8cab0934980473f7108d1a72800b65c6.jpg

Rotten sweet gum in the p.m. that went super quick! ! Yyyaaaayyyy! !! Plus I got my stump cutter back!!
d76403e1bcd26680629ecf8ff05f60da.jpg

I started that stump 3 weeks ago, when my wheel fell off. Finally got back to finish it.
 
The bigger shaft they replaced wasn't torqued to the correct specs. It was torqued to the smaller shaft specs. So essentially it started screwing out/un-threading from the hydraulic motor. As it slid out more and more it was making contact with the bolts and the side of the machine and stuff. Atleast that's what they told me.
 
And on the 7th day The Dan didn't even bother getting out of bed... until the liquor store opened.

Finally got out of that hole after 6 days so today I drove around a little bit then came home and passed out from mimosa before noon.
 
Back
Top