'15 Echo CS620PW Information

Wesspur
Advertise with us
Rugged made
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
BGE541 said:
Whats missing here? Figured while I replace the tank and other goodies why not... squish now at .027" View attachment 439159
Click to expand...
westcoaster90 said:
reed, just curious. is that orange high heat silicone you used on the base of your echo there? you need an anaerobic sealant for that application. silicone will work but not forever. i should also point out that 2 strokes aren't built to take heat. 4 strokes actually run much much hotter. to much heat in a 2 stroke and that's when things start cooking together, kinda like that 372.
Click to expand...
How did we all miss that
 
So I welded up that hole in my muffler. Much more tolerable noise wise. I'm going to add a second port now right out the front when I get some time. As of now it's a stock muffler with the rear facing baffle cut out of the deflector.
 
Big Block said:
So I welded up that hole in my muffler. Much more tolerable noise wise. I'm going to add a second port now right out the front when I get some time. As of now it's a stock muffler with the rear facing baffle cut out of the deflector.
Click to expand...
I don't understand, you want it to be quiet? lol
 
Idahonative said:
Haha...the more pressing question is, when are you going to get those vids loaded on here?:)
Click to expand...

Ha, well lets say the parts orders are running me in circles... got a new tank, came out that it doesn't have the same carb bolt holes as the other (original tank) they not use a steel insert which is important because it was THE WRONG THREAD PITCH!!! Talk about lame... so brought it back my dealer is coving it and new carb bolt for me... Meanwhile I soldered the old tank together then uses JB Weld Water or whatever that stuff is called (curing now) so hopefully I can use a tank sometime this year. Also needed to order an extra AV spring and a plastic piece that I left on BigBlocks Full Wrap that I guess I needed to mount the half wrap!!! So that's my reason, what's yours? ;) I know your busy but just got a Echo 310 for my buddy as his little saw and rebuilding this 455 Rancher so both are getting some love...
 
Any one purchased the bar mount adaptor from Homelite410? I'm looking to mount an Oregon reduced weight bar at 28" 3/8 .063 283RWDD025. It's a Stihl mount for my current ms461. I know it's a lot of bar for the saw, but I want it mainly for in tree removals. I tried a new Stihl 362 and was not impressed at all for the price. Looking pretty hard at the CS 620PW.

Thanks
 
ffchewy17 said:
Any one purchased the bar mount adaptor from Homelite410? I'm looking to mount an Oregon reduced weight bar at 28" 3/8 .063 283RWDD025. It's a Stihl mount for my current ms461. I know it's a lot of bar for the saw, but I want it mainly for in tree removals. I tried a new Stihl 362 and was not impressed at all for the price. Looking pretty hard at the CS 620PW.

Thanks
Click to expand...
Contact Nate (ford f150), I'm shipping them out today.
 

Similar threads

N
Husky 55 with 028 piston
Replies
8
Views
655
Nitris223
N
MikeB Saw Shop
Stihl 024 porting build thread.
Replies
0
Views
368
MikeB Saw Shop
MikeB Saw Shop
Orange Ripper
Ported 1987 Husqvarna 50/55 hybrid
Replies
4
Views
1K
Orange Ripper
Orange Ripper
kiwiguy
New project saw: 026 Pro - couple of questions.
2
Replies
32
Views
4K
bwalker
B
2
Stihl MS 361 Vacuum and Pressure testing - need some help!
Replies
10
Views
2K
stihltech
stihltech

Latest posts

Back
Top