Want to Sell 1/2" chain master links

[nstueve]

So I was going through some of my chain and master link stuff last night and found 2-3 sizes of master links that are bigger than 404.

Don't know if anyone is looking for this kind of stuff but thought I would toss it out there.

These links were in plain baggies so I'm unsure of brand but if there is interest I'll measure them and take pics.

 

[Jon1212]

@Eccentric, @Bill G

 

[nstueve]

I also have tons of 1/4 pitch master links if anyone has any use for them... These will just sit in my link case forever and never get used.

 

[Eccentric]

I'm interested Nathan.

 

[Jon1212]

I'm interested Nathan.

I had a suspicion you would be.........

 

[nstueve]

I'm interested Nathan.

Perfect I'll send you a nice big bag of 1/4 pitch! [emoji847]

 

[Eccentric]

I should have been more specific...

 

[Jon1212]

I should have been more specific...

LOL!

 

[nstueve]

I should have been more specific...

Don't worry, hmmm... [emoji848] I'll toss in a few mini-macs and WT's just for you.

 

[nstueve]

Left is 3/8, then 404 next up from bottom, then bigger... Not 100% on sizes, but the micrometer kinda shows approximate size.

3rd from left - guessing 7/16= 0.4375

4th from left - guessing 1/2

Right side link. - guessing 9/16 = .5625

 

[Eccentric]

Hmm...

How many of each size do you have?

 

[Jacob J.]

Yep, the .450 is for 7/16"...I can use both 1/2" and 9/16", between Aaron and I we can likely make all that disappear.

 

[nstueve]

I have a bunch... need to get a better count... I kinda want to keep a couple of each just for future use if I run into something I need them for. the 9/16 are the fewest of the bunch. Maybe 10. The 7/16 I have maybe 30ish??

What do you use these on? just curious what saws ya'll are working on...

 

[Jon1212]

Hmm...

How many of each size do you have?

OCCAD? Obscure Chainsaw Chain Acquisition Disorder.

 

[Eccentric]

I have a bunch... need to get a better count... I kinda want to keep a couple of each just for future use if I run into something I need them for. the 9/16 are the fewest of the bunch. Maybe 10. The 7/16 I have maybe 30ish??

What do you use these on? just curious what saws ya'll are working on...

I mostly need 1/2". Got a few Homelite and Mac gear drives that run that pitch. Have a couple saws that run 7/16" (my Mono/Wards WD60 comes to mind). Don't have anything that runs 9/16" pitch at the moment, but something will probably come up. IIRC, I have a 9/16" Mac gear drive sprocket that some kind soul (formerly known as Beaker) up in Oregon sent me a while back...

 

[Jon1212]

I mostly need 1/2". Got a few Homelite and Mac gear drives that run that pitch. Have a couple saws that run 7/16" (my Mono/Wards WD60 comes to mind). Don't have anything that runs 9/16" pitch at the moment, but something will probably come up. IIRC, I have a 9/16" Mac gear drive sprocket that some kind soul (formerly known as Beaker) up in Oregon sent me a while back...

What does the Mercury run? 1/2"

I heard that guy asked for a "frontal shot" from someone selling 2100CD parts. I thought it was odd.

 

[Eccentric]

What does the Mercury run? 1/2"

I heard that guy asked for a "frontal shot" from someone selling 2100CD parts. I thought it was odd.

My Mercury runs 3/4" pitch chain, as does my Mall 11 and Mac 7-55 (or rather......they will run it again once I work through my backlog of project saws and get to those monsters). Was hoping that Nathan had dug up some presets for 3/4". Got some time before I need to mess with those chains....

Yeah I saw that 'frontal shot' request in the other thread. A mind as big and full of info as JJ's can't help but be a bit 'off''....

 

[nstueve]

Was hoping that Nathan had dug up some presets for 3/4". Got some time before I need to mess with those chains...

I havent made it though both boxes yet... stay tuned...

 

[67L36Driver]

9/16"? Did someone need 9/16"?

Snagged some Mall/Remy 9/16" repair kits off evilbay, I did.[emoji48]

And, some Remy 7/16" side planer.

 

[Philbert]

I also have tons of 1/4 pitch master links if anyone has any use for them...

I'd be interested in some 1/4" pitch links!

Philbert