Back to original topic of the thread--finished reassembly of 330t with new short block. The used flywheel that I ordered off eBay still not here so I installed the old one--works great, wish I hadn't spent the $20 for replacement! With flashlight and saw in hand, head to my equipment building for fuel mix. Getting excited--more so than starting the new 271t for the first time! Pulled starter maybe 20 minutes--nothing! Pulled sparkplug to make sure it's ok--I had put oil in cylinder--plug looks good. What do I do now?? Plug was dry so don't think it's flooded!! Pulled it again and it happened-----------------------------it fired!!! Pulled again and it started--running really fast but I had opened both carb screws to 2 turns, they were set at 1&1/2. Let it run a minute or so, killed it, started again 1st pull, squeezed throttle just for a second, it came to life! Oiler seems to be working, I can see bar oil flinging in the light of the flashlight!! Put it to bed for the night--couldn't hold saw, flashlight, screwdriver, and then attempt to adjust carb--gonna be a long night!!!!!!