Post pictures of your woodpile/splitting area

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
View attachment 512899 View attachment 512900
These pictures make me smile. This is baby helped keep us warm for almost thirty years. The photos show a couple things.

Larger tires and pipe axle to raise it up to a more comfortable work height. It is easier to see when towing and backing up as well. You can get axles, hubs, and wheels at the junk yard off the rear of front wheel drive cars/vans.

The work table, which in this case, the splitter sits on. It can also be used on either side. We had a rise in theft near us, so with this bench set-up I pulled one wheel off.

Also, notice the cylinder rod has 'stroke reducing collars' on it. You can get them at TSC, or farm supply stores. They are split, with spring clips, so are easily added or removed by slipping them over the cylinder rod, and often come as a kit with various length. There are three collars on this machine, an old SpeeCo. with up graded detent valve, and repowered with the Honda GX200. The collars aren't necessary, but I'm pretty sure you'l like them. Most everything I split was 16" , so I added 6" of collars for an 18" stroke, vs 24". If I got a 19" piece, slip the collar off, split, replace collar. I think the kit was around $30.-34.

Like the look of your old splitter. I just can't see the collars for me. In general I am splitting 24" to 28" for the OWB and this load of mixed ends I am often splitting several pieces at one time except for the 3' stump ends that are to heavy to load more than one. The motor I have is a Lifan 13 hp from the Home Depot. It came with a 3 year warranty and rumor has it that Lifan is a Honda clone and can even use Honda parts. The harbor freight motor had 90 days and was the same cost. The rest of the splitter is Northern Tool.
 
165cc73f6971de57bd3a4783a8712092.jpg

2baa1645504b9b2a473750a84eb5287c.jpg
 
getting a pile of oak chunks and other day's scrounge ready to stack and split the chunks. lil Echo CS-271 saw is one powerful, fun saw to use. I am totally impressed with its power and cutting ability... this wood was cut under tall pines but the shade was minimal as sun pushing over to start lowering. and all this work would not have been any fun at all if the saw was not kicking a** and taking names! well... thot some mite like to see bits and pieces of my small scale logging ops, urban based... lol !

P1010017.JPG P1010018.JPG P1010024.JPG
 
getting a pile of oak chunks and other day's scrounge ready to stack and split the chunks. lil Echo CS-271 saw is one powerful, fun saw to use. I am totally impressed with its power and cutting ability... this wood was cut under tall pines but the shade was minimal as sun pushing over to start lowering. and all this work would not have been any fun at all if the saw was not kicking a** and taking names! well... thot some mite like to see bits and pieces of my small scale logging ops, urban based... lol !

View attachment 513827 View attachment 513828 View attachment 513829
Them little echo's are nice saws.[emoji6]
 
Don't have any pictures of my pile or splitting area but I do have some pictures from the woods.

This:


IMG_20160611_1949317851_zpscy5mp8z4.jpg.html
IMG_20160611_1949317851_zpscy5mp8z4.jpg


Which is this:

IMG_20160611_1949580781_zpss6rotqkc.jpg



Became this:

IMG_20160613_1930494021_zps6ac0owh0.jpg



I normally wouldn't go through the effort of stacking that but I just plain wanted to see it for curiosity sake. Bar is two foot long and my truck is parked behind it. Pile still looks smaller than I was expecting though.
 
I took this picture because the tree was originally laying on the other side of the tree still standing. Always stand on the safe side of tension. Thing swung so hard it still almost came back and got me.

IMG_20160611_2000569391_zpswdcw22de.jpg



Thought I might be a fool for even bucking this one up:

IMG_20160706_1226010631_zpstmh0emuo.jpg



Then I thought I might be a fool for only cutting it as firewood.

IMG_20160706_1225509411_zpskblnhlje.jpg



Echo doing what it does best:

IMG_20160427_1921424391_zpsfxxbgysr.jpg
 
Don't have any pictures of my pile or splitting area but I do have some pictures from the woods.

This:


IMG_20160611_1949317851_zpscy5mp8z4.jpg.html
IMG_20160611_1949317851_zpscy5mp8z4.jpg


Which is this:

IMG_20160611_1949580781_zpss6rotqkc.jpg



Became this:

IMG_20160613_1930494021_zps6ac0owh0.jpg



I normally wouldn't go through the effort of stacking that but I just plain wanted to see it for curiosity sake. Bar is two foot long and my truck is parked behind it. Pile still looks smaller than I was expecting though.

nice foto essay. thx for posting it up... nice effort! nice woods, too. :)
 
I took this picture because the tree was originally laying on the other side of the tree still standing. Always stand on the safe side of tension. Thing swung so hard it still almost came back and got me.

IMG_20160611_2000569391_zpswdcw22de.jpg



Thought I might be a fool for even bucking this one up:

IMG_20160706_1226010631_zpstmh0emuo.jpg



Then I thought I might be a fool for only cutting it as firewood.

IMG_20160706_1225509411_zpskblnhlje.jpg



Echo doing what it does best:

IMG_20160427_1921424391_zpsfxxbgysr.jpg

beautiful grain! what model, size and year is that Echo. nice saw long bar... :)
 
Always seems like something needs work, it could pretty well be a full time job.

Feller buncher (had 2 for a while), delimber, 2 skidders, 2 dozers, excavator, 2 skid steers, 2 log trucks, 9 dump/flatbed trucks, 2 firewood processors, sawmill, etc, etc!
You must have several years worth of sales wrapped up in iron?!
 

Latest posts

Back
Top