Working in a cemetery

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
capetrees
Joined
Jan 6, 2008
Messages
20,411
Location
MA
Anyone ever worked in a cemetery? I have a potential job coming up, need to give a price on a number of takedowns. What should I watch out for? Is there anything I shouldn't do out of respect for the dead? Can I run a mini over a grave? Can I drop trunks on graves? What about grinding?

Thx
 
lone wolf
Joined
Oct 5, 2009
Messages
71,993
Location
Prowling The Pine Barrens
Anyone ever worked in a cemetery? I have a potential job coming up, need to give a price on a number of takedowns. What should I watch out for? Is there anything I shouldn't do out of respect for the dead? Can I run a mini over a grave? Can I drop trunks on graves? What about grinding?

Thx
Just dont break any thin old fragile grave stones.
 
Jakers

Jakers

Owner - Arbor Jake's Tree Service, LLC
Joined
Jan 5, 2012
Messages
2,340
Location
Fergus Falls, MN
I've worked in a few. rope down anything you can to prevent accidents. cushion the trunk or break the fall a bit with logs. as far as driving over the graves, i don't drive more than a 4-wheeler or a stump grinder over them. I've been told in my area anything newer than 1950 should have a vault so in theory a pickup could go over it with no problems.

the company i used to work for was the local excavating company that dug the graves. we drove a JD 410E backhoe over them all the time but sunk in a few. just black dirt over then sink hole and be done. my boss there told me something that helped my through my first dig... "there's nothing you can do to help or hurt them, they're already dead. do your work and be respectful."
 
ChoppyChoppy

ChoppyChoppy

Tree Freak
Joined
Jun 17, 2013
Messages
10,617
Location
AK
I've worked in a few. rope down anything you can to prevent accidents. cushion the trunk or break the fall a bit with logs. as far as driving over the graves, i don't drive more than a 4-wheeler or a stump grinder over them. I've been told in my area anything newer than 1950 should have a vault so in theory a pickup could go over it with no problems.

the company i used to work for was the local excavating company that dug the graves. we drove a JD 410E backhoe over them all the time but sunk in a few. just black dirt over then sink hole and be done. my boss there told me something that helped my through my first dig... "there's nothing you can do to help or hurt them, they're already dead. do your work and be respectful."

Had to have a "in case of death" dealio when I was in the .mil... mostly so the morgue or whatever would know if anything special needed to get done. I wrote on the thing... stuff me in a cardboard box and toss in the dumpster. They thought I was trying to make a joke so I got called into explain myself. Told them it was what I wanted, I don't really care once I'm dead!
 
scheffa

scheffa

ArboristSite Operative
. AS Supporting Member.
Joined
Jul 19, 2011
Messages
424
Location
melbourne aus
Actually worked in one on Friday just gone, I was a little uneasy about, walking over graves and dropping limbs on them. Worst part was dragging branches and disturbing the flowers on some of the headstones and trying to put hem back how you found it. Was also the same cemetery my grandparents are buried in
 
TimberMcPherson

TimberMcPherson

Addicted to ArboristSite
. AS Supporting Member.
Joined
Mar 13, 2003
Messages
5,884
Location
New Zealand
We work in them a bit, my great grandfather is in one of them. We are always super careful and do our best but some of the jobs are not easy!

rootplace lifted these two. we got to put em back

3tPbDkZ.jpg



we did it in a day

eQe2HV3.jpg
 
GrassGuerilla

GrassGuerilla

Olympic Piss-reving wanna be.
Joined
Nov 27, 2012
Messages
2,869
Location
Just south of St Louis Mo.
Never did tree work in one. Grass work and trimming around headstones... Omg! Gotta be careful, using super tough trimmer line is a no no. Don't want to put marks or wear on headstones. If you want your black belt in string trimming, there's nothing else quite like it. Had a three man crew trimming one nine hours a week. That's a lot of string trimming! Wasn't sad to lose that contract to a lower bid.
 
capetrees
Joined
Jan 6, 2008
Messages
20,411
Location
MA
All of these comments are great. :cheers:

My problem is running the mini in the graveyard. As mentioned, I'd hate to cave in a site. Nobody is really sure which direction the bodies are laid, behind the headstones or in front of them. The cemetery is over 300 years old. Lots of old slate and thin white marble stones so everything will be roped down and carried out except the trunks.
 
TimberMcPherson

TimberMcPherson

Addicted to ArboristSite
. AS Supporting Member.
Joined
Mar 13, 2003
Messages
5,884
Location
New Zealand
That's quite the jungle of a cemetery there, TimberMcPherson. Sure looks nothing like our manicured lawn cemeteries here in the US.

They dont have alot of $ put into them and they were not put on flat ground, most of the trees are self sown in the area, but quite a few (4670) were planted as people on the opposite hill objected to overlooking the cemetery. If it was a flatish expanse of grass it would be alot cheaper to look after, but then its treated a bit like a park by locals, its quite beautiful and well wooded.

This stump had grown between the rows, and we were told not to go to deep. In the depression some graves were not brought outright but people paid them off over time. Now those whose family stopped paying were dug out of there full plots and there much reduced remains were put in the area where we were taking out the stump in the pic and not put down to deep either!

EV989JZ.jpg




The area that is well looked after is for our war dead

Cemetery_2.jpg
 

Latest posts

Top