Anybody have a clutch bearing and or bearing sleeve for a 6000/152 pto?
Yes, but where can I find these? The sleeves and bearings sold on Ebay are incorrect for my 6000/152. 962 200 002 does not fit.the clutch bearing and bearing sleeve are the same from the dolmar 144, 152 and dolmar cc.
Here is your bearing. Can't find the race yet.Yes, but where can I find these? The sleeves and bearings sold on Ebay are incorrect for my 6000/152. 962 200 002 does not fit.
A big thank you as I ordered the bearing listed. There is a story behind why these parts are missing on my saw and depending on how something resolves, that story may come out and make the responsible party wish it hadn't.Here is your bearing. Can't find the race yet.
https://www.ebay.com/sch/i.html?_fr...1313.TR0.TRC0.H0.TRS0&_nkw=530090157&_sacat=0
Poulan number for the race is 530090156
Dolmar numbers are
962200001 race
962210001 bearing
At least thats the numbers the IPL I have show
A big thank you as I ordered the bearing listed. There is a story behind why these parts are missing on my saw and depending on how something resolves, that story may come out and make the responsible party wish it hadn't.
And from my experiance, a Poulan "S"6000. Didn't know about the CC so thats good to know too.the clutch bearing and bearing sleeve are the same from the dolmar 144, 152 and dolmar cc.
There are also husqvarna 3120xp chain sprocket conversions done on the dolmar cc. So you have a spur sprocket and can switch to 3/8 chain.
Where to find a manual oiler and a full wrap handle bar?
What are the bearing and race dimensions?
Not sure if this helps at all but Oregon also made a Powermate rim sprocket to fit Dolmar 152, 144, cc & Poulan 5500, 6000 - Part Number - 16375 I was lucky enough to stumble across one NOS on Ebay a while ago:
It came with .404 8 pin rim but I'm guessing that there may have been 3/8 versions?
Have you tried it to see if it fits the saws listed?
Enter your email address to join: