Sold Jonsered 2166 R2

[chipper1]

Another 2166 here that has the "R" on the tank for refurbished. I looked it over pretty good and I don't see any evidence that it's been ran before, it does have a few scratches and a crack in the clutch cover(I driller the end of the crack so it won't spread) from being handled/shipped.
I can sell the powerhead only for $440 or with a 24" jonsered labeled Oregon replaceable tip bar and chain for $500, both prices are before shipping. For another $10 I'll swap the clutch cover for one without a crack.
Pictures coming shortly.
Thanks for looking Brett.

 

[chipper1]

 

[chipper1]

Here's some pictures of the scratches, chips.
The crack runs along the seam from the hole I drilled to the right, there is a chip in the paint on the right where it ends.

 

[Deleted member 117362]

Very nice saw Brett. May want to clean it up! As always you sell some pretty saws. Sure everyone knows this can be made into a 2172 very easily, just saying. GLWS.

 

[chipper1]

Very nice saw Brett. May want to clean it up! As always you sell some pretty saws. Sure everyone knows this can be made into a 2172 very easily, just saying. GLWS.

Thanks bud.
I'll get out the meguires and get to polishing it .
I have a couple getting converted and muffler modded right now for a bit more if that's what someone is after and they don't want to do the work themselves. One will have a base gasket delete too for a nice bump in compression.

 

[stihlaficionado]

Someone buy this so Brett can buy my great condition 357 xp

 

[chipper1]

Someone buy this so Brett can buy my great condition 357 xp

Good evening Mark.
Right after they buy my ported 357 .

 

[cuinrearview]

There's 357s everywhere

 

[JohnnyBlade]

Did someone say ported 357?

 

[chipper1]

Did someone say ported 357?

Did you need one, I've got a ported one, and the one mark has I think is stock. His is in great condition as is mine .
https://photos.app.goo.gl/WUzeoEyAdNWwxru28

 

[stihlaficionado]

There's 357s everywhere

In great condition?

Most of what I've seen in the TP have some mileage on them & it shows

 

[cuinrearview]

I sold two of the nicer ones I've seen, one in each color, last year. They come and go. I have a pretty nice looking G model with a wrap on it's way.I've got a couple to do this winter and one should be a looker. If you're still looking when it's done I'll probably post it here.

 

[stihlaficionado]

I sold two of the nicer ones I've seen, one in each color, last year. They come and go. I have a pretty nice looking G model with a wrap on it's way.I've got a couple to do this winter and one should be a looker. If you're still looking when it's done I'll probably post it here.

Sure, let's see em

You, I & Brett may have great condition 357s yet I stand by my assertion that the majority of the one's I've seen in the TP
have not been in tip top condition

I rarely use mine now

 

[cuinrearview]

Sure, let's see em

You, I & Brett may have great condition 357s yet I stand by my assertion that the majority of the one's I've seen in the TP
have not been in tip top condition

I rarely use mine now

I love all saws, regardless of attractiveness.

 

[East/West CADaddict]

I love all saws, regardless of attractiveness.
View attachment 779498 View attachment 779499 View attachment 779500 View attachment 779501

I TWO Fresh and crispy Benjamin's for the 550.....

 

[stihlaficionado]

I love all saws, regardless of attractiveness.
View attachment 779498 View attachment 779499 View attachment 779500 View attachment 779501

I like the shiny ones myself as I do have have the mechanical aptitude to reconstruct anything outside of an origami

 

[stihlaficionado]

I like the shiny ones myself as I do have have the mechanical aptitude to reconstruct anything outside of an origami View attachment 779503

 

[TRTermite]

View attachment 779504

You can't go to the timber without bar and chain....
and get much done anyway.

 

[stihlaficionado]

You can't go to the timber without bar and chain....
and get much done anyway.

Never ship bars, too much hassle.

If I deliver a saw, it comes w/ b/c

I usually deliver for a nominal fee it it's w/i a 100 mile trip of here

 

[U&A]

So when it says “R” for refurbish what exactly has been refused on it?


Sent while firmly grasping my redline lubed RAM [emoji231]