Want to Buy Looking for 9/32 files

[Modifiedmark]

Anyone got any 9/32 chainsaw files to sell?

Please and thank you.

 

[Modifiedmark]

Bump still looking

 

[cookies]

would those be used for 1/2 or 9/16 chain? never seen that size offered except in flat

 

[Modifiedmark]

Most 9/16

 

[CTH-SXL]

McMaster-Carr shows a 9/32" round files in 2 finishes (Coarse and fine) but they are rat tail files with
some taper and the drawing shows them to be 0.275" diameter , slightly smaller than 9/32" .
Might be worth a try if you can't find anything else .
Charles

 

[cookies]

And I found a 8mm file thats slightly larger than 9/32 sold on ebay, I can send the link if you want it

 

[Wood Knot]

Anyone got any 9/32 chainsaw files to sell?

Please and thank you.

Try looking on MSC's website. They may have something from Pferd. Pferd files have out-performed every other brand I have tried.

 

[Modifiedmark]

And I found a 8mm file thats slightly larger than 9/32 sold on ebay, I can send the link if you want it

Thanks but I have found 5/16" files which is the same as 8mm. Little too large for Oregon #6 chain.

 

[Modifiedmark]

Try looking on MSC's website. They may have something from Pferd. Pferd files have out-performed every other brand I have tried.

I don't believe 9/32 is made anymore. I have looked quite a bit.

 

[cookies]

you might try calling the number in this ad and see if they have any available
https://www.mactools.com/products/mf4r

 

[Modifiedmark]

Bump, still on the hunt

 

[Maintenance supervisor]

https://www.amazon.com/Diamond-Coat...ocphy=1025513&hvtargid=pla-978662472408&psc=1

 

[Maintenance supervisor]

https://triaticinc.com/9-32-diamond-plated-barrel-lap/

 

[Maintenance supervisor]

Maybe something to work with?

 

[Modifiedmark]

Thanks for that but I'm looking for chainsaw files..

 

[Maintenance supervisor]

Most of the old/old shops are mostly closed down now but I'll ask around.
Do yoi know if Homelite or McCulloch had a part # for one?

 

[Modifiedmark]

22970 is what I found for a Homelite number. I have not found any others yet.

 

[thenne1713]

Can

Anyone got any 9/32 chainsaw files to sell?

Please and thank you.

Can we ask for chain size? For 3/8LP and .325 pit chains, use 4.0mm (5/32”) file. For 3/8 pitch chain, use a 4.8mm (3/16”) file. For the 404 pitch chain, the recommended is 5.5mm (7/32”) file.

 

[cookies]

Bump, still on the hunt

did you try calling MAC tools?

 

[cbfarmall]

Can

Can we ask for chain size? For 3/8LP and .325 pit chains, use 4.0mm (5/32”) file. For 3/8 pitch chain, use a 4.8mm (3/16”) file. For the 404 pitch chain, the recommended is 5.5mm (7/32”) file.

He's looking for files for 9/16 chain, Oregon #4, I believe, from the 1950s.

Round saw chain files in this size are hard to find because the chain and saws to pull it haven't been made since the 60s probably.

Also, most 3/8 chain I've encountered used the same 7/32 files as 404 with the exception of Stihl 3/8 using 13/64.