What mix do you prefer?

[Cut4fun]

See, every time we post about blue goo, we get into a fight!

blue goo be gone, I like the red stuff 32:1.

 

[crazymanmike]

What about at the equator. Do you just poke a stick at it ???

cmm

 

[joatmon]

What about at the equator. Do you just poke a stick at it ???

cmm

Simply move left or right depending on your hemisphere of preference.

 

[windthrown]

Thanks for the info , Windthrown
I just used the cheapest, Didn't think it mattered. Next time I fill up I'll buy the good stuff. BTW crazymanmike ,the shaken ,not stirred thing was a satiric funny, not actual practice (James Bond's martini is shaken , not stirred.) I don't think it matters which way as long as you agitate it long enough. And I doubt seriously whether shaken or stirred would have any effect on the amount of smoke generated.

Yep. Use the good go juice in the miniature engines in the buzzsaws. They need more even buring to avoid pre-ignition and flare outs in the chamber. Most saws are built and tuned for 89+ octane these days. I use 91 super, 'cause the octane tends to drop in the can.

As for shaken and not stirred, I think they are pullin' your plonker there, laddy. As for beating oil, octane and gas mix to death, well, let the mantra continue. Usegoodoilmixandatleastmidgradegas-o-leeeneeee....

Flame on!

 

[windthrown]

What about at the equator. Do you just poke a stick at it ???

cmm

You have a choice there. Actually, you only have to go about 30 ft north or south of the equator to get the flush swirl to reverse direction.

Now, the question for the classroom, which way does it swirl in each hemisphere?

 

[joatmon]

Yep. Use the good go juice in the miniature engines in the buzzsaws. They need more even buring to avoid pre-ignition and flare outs in the chamber. Most saws are built and tuned for 89+ octane these days. I use 91 super, 'cause the octane tends to drop in the can.

As for shaken and not stirred, I think they are pullin' your plonker there, laddy. As for beating oil, octane and gas mix to death, well, let the mantra continue. Usegoodoilmixandatleastmidgradegas-o-leeeneeee....

Flame on!

Pretty good pun! :hmm3grin2orange:

 

[Lakeside53]

You have a choice there. Actually, you only have to go about 30 ft north or south of the equator to get the flush swirl to reverse direction.

Now, the question for the classroom, which way does it swirl in each hemisphere?

Hang-on... I need to go flush

 

[windthrown]

Hang-on... I need to go flush

I'd rep yah for that, but I am out of ammo tonight.

 

[joatmon]

Hang-on... I need to go flush

Andy,

Better paddle further down stream!

Be careful out there,

Joat

 

[HEAVY FUEL]

Now is that swirl the container? Or just the gas?:deadhorse:

 

[joatmon]

Bet someone's learning to use the search function tonight! :hmm3grin2orange:

 

[Lakeside53]

Hang-on... I need to go flush

Well... dang it... I had a perfectly positioned number 2, a splash of number 1, stirred gently, and as I raised my hand to the flush handle... "whoom", a huge suck back and it all went straight down.. - NO SWIRL!!

Might be a while before I'm ready to try again

 

[joatmon]

:newbie:

Well... dang it... I had a perfectly positioned number 2, a splash of number 1, stirred gently, and as I raised my hand to the flush handle... "whoom", a huge suck back and it all went straight down.. - NO SWIRL!!

Might be a while before I'm ready to try again

:newbie:

 

[windthrown]

Well... dang it... I had a perfectly positioned number 2, a splash of number 1, stirred gently, and as I raised my hand to the flush handle... "whoom", a huge suck back and it all went straight down.. - NO SWIRL!!

Might be a while before I'm ready to try again

Whoa, Andy my man! You went and upgraded your flusher with a hot saw setup? Maybe you have been in the chainsaw biz a little too long there...

 

[Lakeside53]

I'm pretty sure crazymanmike "doctored" my John:chainsawguy: Sure glad I wasn't smok'in.

 

[2dogs]

I believe there is a tutorial in the off topic humor section on flushing in Japan that deserves a look.

 

[crazymanmike]

I'm pretty sure crazymanmike "doctored" my John:chainsawguy: Sure glad I wasn't smok'in.

There ya go, Kohler hopup now thats an idea

 

[crazymanmike]

Here you go Andy

 

[rbtree]

Cool, now ya won't have to be stirrin' da mixture, Andy...

thanks to da flamin' crazyman...

Chapple flummoxed the starter on that old 2100, ....he'll be passing your way doing that Echo Lake tree for me tomorry....I'm gonna sell him that 044, and maybe the 2100....he's saws are sorrier than ever, he says...

 

[Lakeside53]

Major suckback

Here you go Andy

Yep that's the one. I knew it was you - you have such a lot of talents for a short guy (relative to Gary - but who isn't :hmm3grin2orange: )