026 Stihl Walbro carburetor issue

[coyote556]

My fuel inlet neck is cracked. The plastic part that slides over the brass part (see photos). I don’t know what to order to fix it. It’s sucking air and leaning out. Any recommendations? Parts book doesn’t seem to show that inlet neck.

 

[glock37]

Wt 194 carb

Or grab hold of inlet with pliers and pull straight out its only wedged in

Those inlets can be found on ebay


Sent from my iPad using Tapatalk

 

[glock37]

https://www.ebay.com/itm/128-166-1-...2349624.m46890.l49286&mkrid=711-127632-2357-0

Sent from my iPad using Tapatalk

 

[Mad Professor]

I'll have to check my bookmarks. There is a place that sells replacement elbows that are 1-piece all metal.

 

[coyote556]

Mine is a WT426A. Do you all think the elbow is the same?

 

[hotshot]

I'll have to check my bookmarks. There is a place that sells replacement elbows that are 1-piece all metal.

https://bennettbuilt.com/shop/Carburetors_and_Parts--Walbro_Metal_Gas_Inlet_Fitting.html

 

[Oletrapper]

https://bennettbuilt.com/shop/Carburetors_and_Parts--Walbro_Metal_Gas_Inlet_Fitting.html

Thanks for the link Hotshot. I bookmarked it.

 

[Mad Professor]

https://bennettbuilt.com/shop/Carburetors_and_Parts--Walbro_Metal_Gas_Inlet_Fitting.html

that's it!