066 porting pics

[breymeyerfam]

ask. i bet they have a pile of old ones, or they just toss em.

 

[blsnelling]

are you meaning at the cylinder wall or out in the intake kneck.

its pretty well a straight shot through the intake. i ported it from the cylinder wall and made my way out through the intake kneck.

The sides of the port at the cylinder wall. That will maximize your area for each initial degree of opening.

 

[Evan]

she is together
with a woodland pro gasket (stihl gasket wasnt in stock) squish measure 024 025. compression is 150. caber f cast rings

saw acts and sounds like a completly difrent animal. it feels more like my 440 it revs lots quicker and sounds way difrent. sounds like harley popn at idle running my muffler mod and the dual port cover. i think itl sound better and run better single port.

im not workn tommorrow so ill be able to cut some small cookies. and get a vid. might even toss the 18" bar on it just for giggles since thats about the size wood i have



i got the perma grin going on just from fireing it up in the garage. :greenchainsaw:

 

[GASoline71]

nice. i sure hobe my dentits doesnt have one of those bits the next time im in

LMAO... in engrish?

Gary

 

[Tree Sling'r]

LMAO... in engrish?

Gary

No kiddin' hope his portin' skills are better than his spelling skills.

 

[Evan]

hey now.

ive been workn on useing the spell check. and to think Tree Sling'r i was startn to like you

 

[RiverRat2]

hey now.

ive been workn on useing the spell check. and to think Tree Sling'r i was startn to like you

Well what happened on this one????? using????? Drop the e,,,, when you add ing!!!!

No kiddin' hope his portin' skills are better than his spelling skills.

LOLOL!!!good looking prrt wok for a wookie!!!!!!

Just razzing ya Evan!!!!! Go for it!!!!!

 

[Evan]

man Lakeside53 sure knows how to make a guy feel like he stepped off the short buss right into the tall crowd

 

[Wild Knight]

So, where is the video?

 

[Tree Sling'r]

I am just ribbin' you Evan, relax.

 

[Evan]

i know. in school i blended letters together on papers so you couldnt tell if it was misspelled or not.

noone else noticed that Lakeside53 edited that post by RiverRat2.
was lakeside a MOD?

tuneing vid is 60% loaded onto photobucket

 

[Evan]

im trying to make it so you guys can hear the idle.
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid661.photobucket.com/albums/uu339/Evan03_photo/1231091103-00.flv">

kinda rough tuned it
i always end up changeing howq there tuned ounce i get them in the wood but this is close
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid661.photobucket.com/albums/uu339/Evan03_photo/saw%20vids/GEDC1891.flv">
needs clutch springs, chain likes to spin

i might get it into some wood later. i might have some big oak trees to cut up were talking big 40-50" trees

 

[john taliaferro]

It don't look right sitting on the floor, wife must be home. Port job looks relly nice, ya need something to practice on?

 

[Evan]

what do you have?

 

[john taliaferro]

036 pro, i still need carb ,and top plastic. I got a oem p/c yesterday,

 

[Evan]

honestly id love to practice on it but the cost for me is much to high if it goes bad.

id muffler modd that thing and go from there. ive got a 034 super that runs very good. its not even muff modded yet.

ohhhhhh i almost forgot. i just put 441 bar studs on the 066. i have pics and info on swapn to them if anyones interested. they are much better. lots less hassle when swapn bars or even just chains

 

[blsnelling]

Soundin' and lookin' good Evan.

 

[Evan]

thanks Brad

i was pretty dissapointed in this chain so the 066 is on the bench ive free handed the cutter now im useing the fileOplate to set all the rakers. this is a full skip oregon full chisel round ground.
not very impressive at all. after sharpening i decided the 066 chain was just flat out dull
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf?file=http://vid661.photobucket.com/albums/uu339/Evan03_photo/saw%20vids/GEDC1892.flv">
the 440 is the bare metal bar, its got a full comp LGX , i worked on this chain last night with the fileOplate. i didnt time them but i think the 440 wooped on the 066. and again this is cruddy knotty wood. kinda slim pickins in my wood pile.

 

[mtngun]

Evan, what did the squish and compression end up being ?

Thanks for posting this thread, BTW.

 

[Evan]

squish ended up being 024/025 compression went up to 150.

thats with a woodland pro gasket that measuerd 030 if i remember right