tater28
ArboristSite Lurker
This is the kit that Kafar on eBay sells really is a nice kit.
The one thing I have against this kit is the cast piston other than that I would give it a shot
This is the kit that Kafar on eBay sells really is a nice kit.
He a site sponsor here?
He a site sponsor here?
Well it appears Meteor doesn't make a cylinder kit for the 346, that I can find.
Kafar has a 44.3mm kit listed. You could get that and run a nice meteor piston and probably wouldn't have to worry about it for a long time. Of course if you do that the price would be getting close to OEM....
The 45mm are probably 353 kits. Not sure how different the aftermarket kits are either.
45mm closed port will give you the most power.
Is the 115$ kit an open port 44.3mm cylinder kit?
.....and the 141$ kit a closed port 45mm cylinder kit?
346 is 44mm and open port, 353 is closed and 45mm.
If so, that 346 kit is not a proper one - simple as that!
A 44mm open port kit should be sold as a (non-EPA) 350 kit. There is no excuse for calling it a 346xp kit!
Actually, I would have called the fraud squad, if you sold one to me, saying it was a 346xp kit.
Of course it fits on the 346xp, lots of different kits do that - but it doesn't mean they are 346xp kits!
just out of curiosity....... who is the OEM manufacturer of pistons for husq?
...on their site....they solicit bids i see
Actually, I would have called the fraud squad, if you sold one to me, saying it was a 346xp kit.
Of course it fits on the 346xp, lots of different kits do that - but it doesn't mean they are 346xp kits!
The kit fits the 346, 350 and 353 and the 353 kit comes with an adapter to fit 340/345 saws as well. If I actually made the kits, then they would have been closed port like Husqvarna makes them.. you have the option to not buy one or buy from Husky, not twisting any arms here, just giving the details.
Enter your email address to join: