460 ceramic chain catcher help

[micah5634]

Just got the ceramic chain catcher for my 460 does any one have a photo or can tell me how to install it it has a small c-clip with it where does it go?

 

[Trigger-Time]

Just got the ceramic chain catcher for my 460 does any one have a photo or can tell me how to install it it has a small c-clip with it where does it go?

It slides over the shaft after the the roller is slid on shaft......keeps roller
from falling off when you remove clutch cover.

If you don't have small snap ring pliers, set ring on end of shaft, use
a small socket and light hand with hammer and drive it on. It has
enough friction to hold it in place.

 

[Lakeside53]

Place it on the shaft after the ceramic; tap it on with a tiny socket or tube..

 

[forestryworks]

what they said

and you don't gotta worry about gettin' that clip on snug

close enough to the stop is good

it's worked for me

 

[gregz]

Make sure you put it on the cover spike ,easier to line up
and out of the way when you have the cover off.

 

[micah5634]

Thanks got it on looks great

 

[RiverRat2]

Make sure you put it on the cover spike ,easier to line up
and out of the way when you have the cover off.

yeah,,, what he said!!!!!!