Mastermind
Work Saw Specialist
I've stopped porting the 562XP because of this......
Well that's not goodI've stopped porting the 562XP because of this......
How much are the carbs? Are you buying a newer updated model carb or the same exact thing?I've had three like that........after buying some new carbs out of my pocket for them.....I said enough. That saw and the Dolmar 5100 are off my list.
It would sour me on a brand if I had to drive more than an hour to find a dealer to fix my saw. I buy local when I can and don't under stand how a dealer can stay a dealer if he does not have the ability to fix what he sells. This goes to all brands.
How far is the local USPS?Cutting the spring on the metering needle didn't help at all on my saw, still falls flat on it's face when I hit the throttle after it warms up. You're exactly right about dealers should be required to have the tools, software, and training before they can keep their dealer status, just like the automotive industry. I guess that I'm about to start on a search for a dealer within a day's drive that can work on my saw. This is ridiculous, that a manufacturer will put out a piece of equipment that the "certified" dealers can't (won't) work on and the manufacturer doesn't require them to have the ability to service what they sell.
The EL46 is 579 19 41 05.Anyone have a part number for the new carb? I'm blind, can't find it.
And this carb has an adjustment like the 550? People keep telling they do.The EL46 is 579 19 41 05.
That was a EL44. Same applies to 46.the carb I did yesterday didn't look at all like the one in your video. the el46 from the 562 is different
ive had a bran new saw with bad carb out of the box. not the autotune part ,the carb itself was bad. I have never had to replace a carb before that. id say that I am nearing 70-75 ported autotune saws now too.
I hear what you are saying Terry. However, it seems that the problems are not on saws right out of the box, but developing several months into ownership.
why the 5100?I've had three like that........after buying some new carbs out of my pocket for them.....I said enough. That saw and the Dolmar 5100 are off my list.
Enter your email address to join: