670 JohnyRed crankshaft

[romeo]

I have recently acquired a 670 with very low hours (maybe 1 hour) and a broken crankshaft. It was broke off clean on the clutch side. It belonged to a fire dept. and was wearing a carbide chain, some yahoo decided he was going to cut a car in half and "SNAP".

Anyway, I know this saw is related to the 266's, and 268's. Before I tear every husky apart in my junk pile, WHAT ALL SAWS SHARE THIS CRANKSHAFT?

Also, do the 272's and the 372's cranks interchange?

 

[wadelong]

I asked dozerdan about that some time back. I also had a 670 with a bad crankshaft. If I remeber right all of the saws that you mentioned will work except the 372.
Wade

 

[HiOctane]

All crank fits like 266,630,162,61,272,268,625,630,670 except the 372.But on the later models,they had fine threads on the clutch side,so you need a clutch with fine threads too.The fine threads ones never snap on pto side,at least for what i saw.

 

[rupedoggy]

I believe the following cranks will work. The 61, 162, 66, 266, 268, 272 Husky. The Jonsered 625 and 630 will also work. The 272 is totally different than a 372, not even close. The 371 and 372 are almost a duplicate of each other. Mike

 

[romeo]

I believe the following cranks will work. The 61, 162, 66, 266, 268, 272 Husky. The Jonsered 625 and 630 will also work. The 272 is totally different than a 372, not even close. The 371 and 372 is almost a duplicate of each other. Mike

Thanks for the help, I could spend a day splitting cases otherwise.

 

[SawTroll]

I believe the following cranks will work. The 61, 162, 66, 266, 268, 272 Husky. The Jonsered 625 and 630 will also work. The 272 is totally different than a 372, not even close. The 371 and 372 are almost a duplicate of each other. Mike

You got that right, as far as I know....:biggrinbounce2:

HiOctane was close also, but forgot the 66.....